rags2riches

Hello Everyone, this is my second post, and hopefully more to come, I have been navigating through these boards for about a year, and decided I wanted to startup my own hmt project.


Currently I have a 90 civic DX, I have done all my suspension work, and dropped in a dohc ZC, I recently purchased a greddy sohc turbo manifold, and a t25 turbo,
problem is I know the turbo will not bolt to the manifold so I guess I need an adapter plate....can anyone point me in the direction?..


SO far I have

t25 turbo
dsm 450cc injectors
chipped ecu w/ datalog ....im on pgmfi boards

I am aiming for 7-10 psi daily driver.

bikerchris13

did you look in the for sale section? BMC Racing has the best adapter plates available for anything you want
research research research

crxfreak88

Check the FAQ'S and the classifieds section. Dont be afraid to ask questions.

jake2001z001

Hello and WELCOME to tha dark side, good luck

Reddy

I just used a Greddy manifold on a kit this weekend. The turbo was a T3 so I just made a plate for the manifold, than a plate for the T3 flange and welded a piece of 2.5 inch pipe in between. It worked really nicely