New Times. Haha D15.
Since the last 13.004 Ive only done a couple things. But they paid off. NICELY.
-Removed rear bumper and support. -Removed door panels -Removed Wipers and wiper motor. -Replaced my plugs. Been in there forever and recently fouled out. -Huge temperature change since last run. Nearly 40 degrees cooler. Here goes. 60' - 1.284 1.861 1.778 330 - 4.641 5.190 5.075 1/8 - 7.373 7.931 7.796 MPH - 91.10 90.70 91.22 1000- 9.719 10.293 10.145 1/4 - 11.723 12.314 12.157 MPH - 112.30 111.30 111.81 Still non intercooled stock d15 @ 11psi. 23x8x13's M&H The 1.284 60 ft is most likely bogus. Im gonna disregard the 11.7 run other than the MPH. https://i5.photobucket.com/albums/y1...ries/Lenso.jpg https://i5.photobucket.com/albums/y1...ies/Lenso1.jpg |
Re: New Times. Haha D15.
Holyyyy ----. That is MOVING for what you've got into this thing.
What do you mean by removed door panels? The lightweight interior peices? |
Re: New Times. Haha D15.
Nice times!
:y |
Re: New Times. Haha D15.
:6
ARP headstuds? Boosting on base map? |
Re: New Times. Haha D15.
Yea I didnt know that the door panels weight 2 ounces each haha.
But keep in mind, there is no interior in this car other than the seat and a partial dash. No heater core or anything. But I havent cut the car up at all yet. Thats next year when I run 10.99 with under 300 whp. |
Re: New Times. Haha D15.
ARP Studs torqued to 90 ft lbs.
Its an outdated tune...But this is the exact motor is was tuned on. But setup has changed. Same turbo though. |
Re: New Times. Haha D15.
>:D
|
Re: New Times. Haha D15.
Originally Posted by D16Y8-Z6
60' - 1.284
That 60 ft is not a misprint. |
Re: New Times. Haha D15.
I cut a 1.4 60 ft with a 14 sec car. Lets just say someone mcdonalds wrapper flew by the timing lights
car was getting 2.1 60's the rest of the night 1.2 is an error |
Re: New Times. Haha D15.
Thats what I said to the people at the track. They told me I was wrong. Who knows.
12.1 is good enough for me anyway. |
Re: New Times. Haha D15.
Whats the setup again?
|
Re: New Times. Haha D15.
Originally Posted by D16Y8-Z6
Thats what I said to the people at the track. They told me I was wrong. Who knows.
12.1 is good enough for me anyway. Its impossible. Physics doesn't lie. Rednecks working tree lights do. |
Re: New Times. Haha D15.
Originally Posted by chris
Its impossible. Physics doesn't lie. Rednecks working tree lights do. |
Re: New Times. Haha D15.
D15b2. Y7 head. Z6 Intake Mani. ARP studs. SS auto mani braced by me. 3inch DP, Holset h1c @11psi non intercooled.
|
Re: New Times. Haha D15.
that is sooooo ------- cool ;D
ol schooooo b2 cummin threw |
Re: New Times. Haha D15.
first pass is like he staged with the rear tires, but the other two are legit.
bumper cover mod FTW, maybe the rest of you'll listen on day. |
Re: New Times. Haha D15.
:y Solid work that is getting it done :6
|
Re: New Times. Haha D15.
Bone I staged with the fronts..
My pal that was staged next to me staged with the rear tires first and then they made him back up and stage with the front. Who knows what happened. Either way 12.1 is good enough for me. |
Re: New Times. Haha D15.
what tranny you got ?
|
Re: New Times. Haha D15.
I "THINK" its a 90 ex trans. Thats what I was told it was when I got it free.
Anything was better than the 4 speed. Gearing is pretty good. Could be better. @ 7800 3rd gear tops out at about 95 mph. 4th is done by about 125-130. 22 inch slicks would be optimal. |
Re: New Times. Haha D15.
wow, that is hauling some mail, for very little work, very impressive :6
|
Re: New Times. Haha D15.
how mant miles are on the block ?
|
Re: New Times. Haha D15.
About 240.
|
Re: New Times. Haha D15.
Thats awsome for a stock block D15.
What do you run for fuel? pump 91-92? |
Re: New Times. Haha D15.
93 pump.
And still a stock dpfi fuel pump. Anyone selling vitaras for less than 125 shipped pm me. Ive already got my y7 block and eagles ready to go. |
Re: New Times. Haha D15.
y7 with a stock y7 oil pump ?
how much boost you pushing then |
Re: New Times. Haha D15.
Yes its a shitty Y7/8 block. Ive had nothing but spun bearings with them in the past. (2 times)
But it was 50 bucks and it will get my goals reached. I was gonna port out the oil pump. But ---- that. Im just gonna run 5 qts oil in the bitch to raise the pressure. Gonna go for 20 psi or whatever gets me NEAR 300 whp. Gonna need an IC also. |
Re: New Times. Haha D15.
i told you i'd hook you up with that audi one
|
Re: New Times. Haha D15.
Buy my stuff. https://www.homemadeturbo.com/forum/...?topic=86344.0
BTW I also have a intercooler, and a z6 block; pm me if you want it. |
Re: New Times. Haha D15.
Cracker I might have to take you up on that offer..
|
Re: New Times. Haha D15.
i dont even know what to say joe. you're a sick man. so the car prob weighs about 1800 with you in it?
|
Re: New Times. Haha D15.
Ha.
|
Re: New Times. Haha D15.
WOW Impressive. ;)
|
Re: New Times. Haha D15.
Thats great, those times are probably the best you can get per dollar - including putting slicks and NOS on an old mustang! I'm hoping to boost the D15 in my winter beater with a pure HMT setup (besides oil supply), non intercooled & whatnot. This makes me feel good since I think its just its poor condition that can kill it now. I got a spare for free, so I've got nothing to loose.
|
Re: New Times. Haha D15.
Very nice.
|
Re: New Times. Haha D15.
What do you have done to the suspension?
|
Re: New Times. Haha D15.
|
Re: New Times. Haha D15.
Hahha Joe.
I need to look into that. Suspension is GC off the shelf 380/280 spring rates. Tokico blues up front. KYB AGX in rear. Right side is blown and very dangerous. Going to the track tomorrow(Sunday). Have new experimental shocks in the rear. We'll see how they do. |
Re: New Times. Haha D15.
Went back to the track.
Ran another 12.1 Best 60 ft yet though. 1.70 |
Re: New Times. Haha D15.
Damn those are some good numbers, just need to put the intercooler on and up the boost ;). BTW are you still coming tomorro? pm me.
|
All times are GMT -5. The time now is 02:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands