Ok so instead of building my ls for my 93 teg, I bought a built ls/vtec with 9:1 je pistons, eagle rods, balanced bottom end, acl bearings and 95 gsr head. I need suggestions on what turbo to go with now. Im looking for around 250-275whp and full boost between 3.5-4k running 8-10 psi. So anyone with suggestions, no smartass comments, I already calculated some stuff to see what I should go with but I wanted some real life expirience to back it up. Been researching for 5 months so now im ready to get started. Thanks in advance! by the way will be running uberdata management

 

come on!

 

275?

-----

 

you bought a built ls/vtec and all you want is 250-275? With hopes like that you wont need a very big turbo.

 

keeping it moderate in the beginning, I spent alot of money on this damn thing and I dont want to blow it up as soon as I get it, looking at getting either the sc60 or sc61, run 8psi to get a feel for it, then jack it up to 10psi, I cant go too big anyways this is my daily plus for all the little ricers around here, that will be plenty to knock their socks off!

 

Go big or go home...275....pfffffftt

 

how big would you go, i really dont want to blow the motor, it still has the stock sleeves and I was told they could only handle 300hp, if they will handle more please tell me and i will go bigger, just dont want to blow my ---- up, i dont have the funds to replace it!

 

anyone?

 

dude, plenty of us are boostin 10 psi on stock blocks, an du got a built one and want to start off at 8, dont be a -----, start at 15

 

im not trying to be a ----- im trying not to blow my engine, like i asked before i got ------- comments how much can stock sleeves handle, the internals are good but that doesnt have ---- to do with possible weaknesses in the sleeves