new motor but here a little knocking sound
 

I just got done rebuilding my motor, its a B18a with eagle rods, and srp pistons with acl rod and main bearings,and i got a B16a head and i got a t4 turbo boosting like 8psi, And with 450cc DSM injectors with inline resistors, with a safc2. I hear a little knowcking sound until i get to about 2 1/2 thousand RPM's. Is that good or bad???? or is that just because i still have to break the motor in????

Re:new motor but here a little knocking sound
 

sure i got the mains torqued down to spec?

Re:new motor but here a little knocking sound
 

You better pull it out and send it to me, its fucked. I however are a nice guy so I will give you 200.00 for it :) Seriosly though did you measure or plastigage everything?

Re:new motor but here a little knocking sound
 

does it go away once the engine is warm?

did you have the cylinders honed?

Re:new motor but here a little knocking sound
 

no it dosent go away and it 20 over now so yeah it ben honed

Re:new motor but here a little knocking sound
 

mine with spr pistons knocks like a disel(sp?) when it was N/A and it still makes that noise if i am not boosting.
once it hit boost and heats up, the noise is compeletely gone until it cools back dwon.

Re:new motor but here a little knocking sound
 

take a screw driver, phillips, and put the tip to the motor in different spots and then put your ear to the handle , like right up against the handle. It will allow you to hear the engine noises better.

you can play with that and it might help you with finding yer knock

nathan

btw,

knock knock... (joke)

Re:new motor but here a little knocking sound
 

if the knock goes away at higher revs then it's most likely a mating of parts issues. Hey Jeff any of those honda blocks u threw together ever knock?

It's a good thing I don't ---- with hondas, they are a bitch.

Re:new motor but here a little knocking sound
 

how long have you been driveing like that

Re:new motor but here a little knocking sound
 

i put je pistons in and it knocks in low rpms

then again im not getting alot of oil pressure so who knows