Forced Induction Custom FI Setup Questions

New member, unique crx with a problem *FIXED!*

Old Aug 27, 2006 | 07:35 PM
  #11  
Zeniceguycrx's Avatar
3.0 BAR
 
Joined: Feb 2006
Posts: 3,905
Default Re: New member, unique crx with a problem

aint that some ----! U said u changed the tps sensor i know, but get a multi meter and check your voltage output at the ecu to see if your getting the wright signal there. also through in some new ngks for the hell of it.

your fine at WOT, you could also have a vacume leak somwhere
Old Aug 27, 2006 | 09:54 PM
  #12  
ososlohatch's Avatar
3.0 BAR
 
Joined: Apr 2005
Posts: 6,036
Default Re: New member, unique crx with a problem

nah a vacuum leak might make it run shitty but not sputter out like that .. also if it had a vacc leak it would have a boost leak .. is it just me of is it not even hitting vtec ... ur ecu may be in limp mode
Old Aug 27, 2006 | 10:12 PM
  #13  
Sureshot's Avatar
Thread Starter
0.0 BAR
 
Joined: Aug 2006
Posts: 30
Default Re: New member, unique crx with a problem

I can't tell and the last owner said vtec isn't an issue but I never heard or felt it while driving IDK
Old Aug 27, 2006 | 10:44 PM
  #14  
ososlohatch's Avatar
3.0 BAR
 
Joined: Apr 2005
Posts: 6,036
Default Re: New member, unique crx with a problem

lol did the disable closed loop mod .. if not ..lol vix your codes and see what happens
Old Aug 27, 2006 | 10:55 PM
  #15  
ifly87's Avatar
3.0 BAR
 
Joined: Dec 2005
Posts: 2,081
Default Re: New member, unique crx with a problem

I would def check your voltage at your tps and calibrate/adjust it.
Old Aug 27, 2006 | 11:23 PM
  #16  
Zeniceguycrx's Avatar
3.0 BAR
 
Joined: Feb 2006
Posts: 3,905
Default Re: New member, unique crx with a problem

what ecu is in it, what program is running it?
Old Aug 27, 2006 | 11:27 PM
  #17  
z1guy's Avatar
1.5 BAR
 
Joined: Mar 2006
Posts: 834
Default Re: New member, unique crx with a problem

get any code figured out before you attempt to figure this out. i hate these threads, "yeah, i have a CEL, but i KNOW its not the problem, what else could it be".
Old Aug 28, 2006 | 12:37 AM
  #18  
Sureshot's Avatar
Thread Starter
0.0 BAR
 
Joined: Aug 2006
Posts: 30
Default Re: New member, unique crx with a problem

CEL's bother me very much and its the first thing I usually take care of but in this case the previous owner said himself that the only code it throws, which I have checked to be accurate, is a VSS code and the car ran fine for 2 years like this with no working speedo and a vss code. I will adresss it as soon as time permits though.

Pr3 with street tune by xenocron on chromepro

ososlohatch- You might be on to something there, like stated I'm still learning but I would imagine having the o2 sensor unplugged would substitute for the "mod"? I guess I should probably get a wideband too...
Old Aug 28, 2006 | 01:07 AM
  #19  
TheMadScientist's Avatar
1.0 BAR
 
Joined: Jun 2006
Posts: 265
Default Re: New member, unique crx with a problem

Your injectors are fried in two of the cylinders or your resistor box is fried. What probably happend is something grounded out to the frame and fried the injectors or resistor box because the resistor box in the older hondas like that is grounded to the frame. The reason I say that is becasue a buddy of mine (B20Accord) had the same problem on his '86 accord after a severe grounding issue. Replace both of those and then see how it runs. Try the injectors first that's what fried on his.
Old Aug 28, 2006 | 01:38 AM
  #20  
z1guy's Avatar
1.5 BAR
 
Joined: Mar 2006
Posts: 834
Default Re: New member, unique crx with a problem

Originally Posted by z1guy
get any code figured out before you attempt to figure this out. i hate these threads, "yeah, i have a CEL, but i KNOW its not the problem, what else could it be".

Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:01 PM.