Need Turbo Info.....Identification help...(56k beware)
 

I just picked up this turbo on the 4 sale section, and it was listed as a T-25. Well guess what, its not :-\, np though.
I need help identifying it though. What car is it from?

I am sure it is a T-3 (square exhaust intake) w/.48 trim. But I am unsure how to go about building a downpipe for it.
Is the bolt patern typical for a T-3? and where can I get a flange? From the looks of it the o2 housing cant be used as the cross/engine mount is in the way (see pic).

I am also reluctant to weild to the cast Iron...my weilding skills suck. So here are my pics

http://img.villagephotos.com/p/2003-10/437267/01.jpg

http://img.villagephotos.com/p/2003-10/437267/03.jpg

http://img.villagephotos.com/p/2003-10/437267/04.jpg

The turbo, going on my ZC
how I identified the T-3, the square inlet, has to be port matched to the gasket/manifold

http://img.villagephotos.com/p/2003-10/437267/06.jpg

The o2 housing, see how it points off to the left, thats the headache....

http://img.villagephotos.com/p/2003-10/437267/05.jpg

http://img.villagephotos.com/p/2003-10/437267/07.jpg

The exhaust end w/wastegate 5 bolt set up, all the flanges I have seen block off this wastegate :P also I am unsure about this bolt pattern

Re:Need Turbo Info.....Identification help...(56k beware)
 

nice red x

Re:Need Turbo Info.....Identification help...(56k beware)
 

Geesh hold your horses, still loading the pics ::)

Re:Need Turbo Info.....Identification help...(56k beware)
 

i figured as much ;D
i caught you at just the right time

Re:Need Turbo Info.....Identification help...(56k beware)
 

you still see those damn red x's ???

Re:Need Turbo Info.....Identification help...(56k beware)
 

Not me, I see all the pics. Oh wait except for the first one

Re:Need Turbo Info.....Identification help...(56k beware)
 

Anyone?

Re:Need Turbo Info.....Identification help...(56k beware)
 

Red Xs...but you keep saying it has a square inlet for the exhaust...T3s are rectangular. Without working pics, can't tell if that's what you mean. But if you need a flange, just look on eBay...they're always on there.
Sucks when turbos are misidentified, eh? I bought one awhile ago that was listed as a T3, and it turned out to be an IHI! That sucked.

Re:Need Turbo Info.....Identification help...(56k beware)
 

i can see all but the first pic

Re:Need Turbo Info.....Identification help...(56k beware)
 

Re:Need Turbo Info.....Identification help...(56k beware)
 

Alright the pics were coming up on my Computer, but found out my pic server is tits up, I'll host on a site, and repost....Ignore the damn XXX's

Picture problem fixed..., I found anouther turbo with a simialar bolt patern, it might be a t25 off a sr20dett (unsure of exact name) anyways, I need a custom flange for this, does anyone make one, or do I have a date with the local fabricator?

Re:Need Turbo Info.....Identification help...(56k beware)
 

Looks like a T-25 to me...

Re:Need Turbo Info.....Identification help...(56k beware)
 

i agree ;)

Re:Need Turbo Info.....Identification help...(56k beware)
 

That's a DSM T25. Looks to be in pretty good shape too.

How much you want for it? ;)

Re:Need Turbo Info.....Identification help...(56k beware)
 

Its in excelent condition, but what about the square inlet, and 5 bolt patern on the exhaust /o2 housing? I thought DSM T25's had a 4 bolt pattern, where do I get an exhaust flange for this oddball?

Re:Need Turbo Info.....Identification help...(56k beware)
 

that's NOT a DSM T-25, unless someone has swapped the exhaust housing out or something, cause that's not a DSM flange...either of them....looks to me like the JDM T-25(off of a SR20DET, lucky for you)...HKS makes a manifold that will mount that turbo to a D16...OptionsAuto.com has them for like 270 or 280...I'D get that manifold and boost away...you should make crazy power...for a D

Re:Need Turbo Info.....Identification help...(56k beware)
 

Cool thanx ;D
I just confirmed it through HKS, they have every flange I need, probably if I look hard enough I can order a downpipe directly from HKS....I found a flange too