NEED OIL FEED LINE HELP!!! (T3 turbo)!!
 

Ok ive got the T fitting. There's a male hout 1 end, and nothing out the opposite end (just a female hole in the T) and then the SS line from the middle. THis SS line connects to the feed on my T3 turbo. But the SS line fitting is female and my turbo fitting is also a female (bronze colored) What goes in between!

I need this badly.

THnaks
Dan

Re:NEED OIL FEED LINE HELP!!! (T3 turbo)!!
 

an -an fitting

Re:NEED OIL FEED LINE HELP!!! (T3 turbo)!!
 

ok sweet thanks, do u know where i might be able to find one? (I know absolutely NOTHING about these fittings) :)

Re:NEED OIL FEED LINE HELP!!! (T3 turbo)!!
 

well you have to know what size yours is, and what thread your turbo is....then go to summitracing and look up earls fittings

Re:NEED OIL FEED LINE HELP!!! (T3 turbo)!!
 

cool thanks yeah someone told me that, it's -3an but then someone mentioned a 90 degree fitting

Re:NEED OIL FEED LINE HELP!!! (T3 turbo)!!
 

well that depends how you have your turbo setup/oil line routed

Re:NEED OIL FEED LINE HELP!!! (T3 turbo)!!
 

Alright, thanks a TON for your help. I've got it figured out now. man that was hard for me for some reason lol. not sure why just was

Re:NEED OIL FEED LINE HELP!!! (T3 turbo)!!
 

look in the faq there is the best explanations and diagrams.

Re:NEED OIL FEED LINE HELP!!! (T3 turbo)!!
 

i think getting all the right fittings is the hardest part about this whole thing, i even bought the kit that stealthmode is selling and still needed more.
it will all be worth it after this weekend, i hope (crossing fingers).

Re:NEED OIL FEED LINE HELP!!! (T3 turbo)!!
 

The back of the tee fitting is where you put your sensor back in. Your feed line should have a -4 an to 1/8npt fitting. The 1/8npt goes into your turbo. Maybe you put the fittings in the wrong place? (near block)or something. Do you have pics of what your describing? Let me know if you need any help. Thanks