NEED OIL FEED LINE HELP!!! (T3 turbo)!!
#1
NEED OIL FEED LINE HELP!!! (T3 turbo)!!
Ok ive got the T fitting. There's a male hout 1 end, and nothing out the opposite end (just a female hole in the T) and then the SS line from the middle. THis SS line connects to the feed on my T3 turbo. But the SS line fitting is female and my turbo fitting is also a female (bronze colored) What goes in between!
I need this badly.
THnaks
Dan
I need this badly.
THnaks
Dan
#9
Re:NEED OIL FEED LINE HELP!!! (T3 turbo)!!
i think getting all the right fittings is the hardest part about this whole thing, i even bought the kit that stealthmode is selling and still needed more.
it will all be worth it after this weekend, i hope (crossing fingers).
it will all be worth it after this weekend, i hope (crossing fingers).
#10
Re:NEED OIL FEED LINE HELP!!! (T3 turbo)!!
The back of the tee fitting is where you put your sensor back in. Your feed line should have a -4 an to 1/8npt fitting. The 1/8npt goes into your turbo. Maybe you put the fittings in the wrong place? (near block)or something. Do you have pics of what your describing? Let me know if you need any help. Thanks