Need help... Here is a pic of my custom Manifold
 

Alright, the manifold is made but there is no opening to put the flange. Now, i need your help on deciding HOW to and WHERE and WICH way should I put the Td04 flange. It should be close to the middle, between middle and far right (front view) to clear the turbo clearance. But the thing is, those 90deg and Tees are round, making it very difficult to weld the flange directly without having a kinda neck-to-flange style... Any suggestion is welcome.

Thanks
real pics soon

Re:Need help... Here is a pic of my custom Manifold
 

OUps ... here a pic
http://pages.infinit.net/bobo10/manifold.JPG

Re:Need help... Here is a pic of my custom Manifold
 

where you get the parts from to make this turbo manifold?

Re:Need help... Here is a pic of my custom Manifold
 

Does this help?
http://ebay0.ipixmedia.com/abc/M28/_...b63452/i-1.JPG

Re:Need help... Here is a pic of my custom Manifold
 

where do you get that neck thing?

Re:Need help... Here is a pic of my custom Manifold
 

Thanks Phresh_5.. it does help a lot.

For the others.. the pipes a Butt to Butt weld pies, schedule 40 thickness and carbon steel type. You can get them at mcmaster.com or find a local plubing distributor (home depot and all the other little plumbing stores barely has them ).

The flange, well, it's up to you to find out where local or you can buy at cheapturbo.com but it's expensive.

Re:Need help... Here is a pic of my custom Manifold
 

flanges need to be milled. someone on here can make u one i am sure..

Re:Need help... Here is a pic of my custom Manifold
 

so knowbody knows where you can buy the part in the pic that goes between the turbo flange and the butt-weld pipe?

Re:Need help... Here is a pic of my custom Manifold
 

its just a piece of square tube that has been notched you can probly go to your local steel co. and get a REM for free.

Beau

Re:Need help... Here is a pic of my custom Manifold
 

yep then just use a grinder to shape it..