Need estimation of HP being produced, Dyno not avaialable (pics added)
Thread Starter
0.5 BAR
Joined: May 2004
Posts: 129
Need estimation of HP being produced, Dyno not avaialable (pics added)
Hey,
My friend just boosted his car and these are his specs:
Motor : JDM b16a
Compression ratio : 10.4
Turbocharger : Garrett t3 super60
Size : .42
Boost : 7psi
BOV : Xs power, type3
Waste gate : External, minimum 5psi
Internals : Stock Internals (factory high compression)
Fuel : FMU
Ignition : MSD
Boost control : Boost retard control
Exhaust specs : 3 inch free flow (HKS)
Manifold : Xs power High flow chrome turbo manifold
Differential : Phantom grip LSD
Clutch : stage3 ACT performance clutch
Its a 96 4door civic lx. his 0-60mph time is just under 6secs( if thats helps u any) and he wants to know if u can give a rough estimate of what kind of Hp/torque he is producing. Since there is no Dyno Avaiable in Pakistan he has to make rough estimations which arent that accurate. But as most of u probally have seen other cars with the same specs u might know more. Even a rough esitmation on the HP he is producing will be fine.
He is running his car at 7psi.
The ppl who tuned his car say he should be running at around 270HP. Any help would be appreciated
(pics will be posted soon)
thanks.
My friend just boosted his car and these are his specs:
Motor : JDM b16a
Compression ratio : 10.4
Turbocharger : Garrett t3 super60
Size : .42
Boost : 7psi
BOV : Xs power, type3
Waste gate : External, minimum 5psi
Internals : Stock Internals (factory high compression)
Fuel : FMU
Ignition : MSD
Boost control : Boost retard control
Exhaust specs : 3 inch free flow (HKS)
Manifold : Xs power High flow chrome turbo manifold
Differential : Phantom grip LSD
Clutch : stage3 ACT performance clutch
Its a 96 4door civic lx. his 0-60mph time is just under 6secs( if thats helps u any) and he wants to know if u can give a rough estimate of what kind of Hp/torque he is producing. Since there is no Dyno Avaiable in Pakistan he has to make rough estimations which arent that accurate. But as most of u probally have seen other cars with the same specs u might know more. Even a rough esitmation on the HP he is producing will be fine.
He is running his car at 7psi.
The ppl who tuned his car say he should be running at around 270HP. Any help would be appreciated
(pics will be posted soon)
thanks.
3.0 BAR
Joined: May 2005
Posts: 1,811
Re: Need estimation of HP being produced, Dyno not avaialable (pics added)
210-225bhp.
In any event he got hard core owned. That thing won't even flow anywhere close to 250 at 7psi.
He'd need to be running much closer to 14psi to be putting down 270.
In any event he got hard core owned. That thing won't even flow anywhere close to 250 at 7psi.
He'd need to be running much closer to 14psi to be putting down 270.
Thread Starter
0.5 BAR
Joined: May 2004
Posts: 129
Re: Need estimation of HP being produced, Dyno not avaialable (pics added)
even though the engine is at 170hp stock it will be only doing around 210-220? that is pretty sad then cause of the amount of money he put into it...
Thread Starter
0.5 BAR
Joined: May 2004
Posts: 129
Re: Need estimation of HP being produced, Dyno not avaialable (pics added)
Originally Posted by tuname420
lol they have honda civics and turbos in pakistan
1.0 BAR
Joined: Dec 2002
Posts: 604
Re: Need estimation of HP being produced, Dyno not avaialable (pics added)
lol buy a gtech and enter the cars REAL weight.... it will be pretty close.... otherwise i fail to see a reason that he NEEDS to know his horsepower. like it really makes a difference what the number is... is he happy with the car or not? does he think its fast?
1.0 BAR
Joined: Mar 2004
Posts: 245
Re: Need estimation of HP being produced, Dyno not avaialable (pics added)
Originally Posted by tuname420
lol they have honda civics and turbos in pakistan
I would guess 225 whp, that is around the 270HP your tuner is guessing, so he is right on.
Nice car!
