HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   my turbo install in done now i have bugs..help (https://www.homemadeturbo.com/forced-induction-7/my-turbo-install-done-now-i-have-bugs-help-87607/)

mistahmac 01-02-2008 11:45 PM

my turbo install in done now i have bugs..help
 
ok i just finshed installing my hmt system.
log manifold, t3 turbo, 2.25 dp to 3 inch exhaust with fmic

d16y7 with d16y8 intake manifold
y7 TB with 3 wire aicv.
450cc dsm injectors
stock

im trying to convert it to a obd1 p06 ecu chipped by dave lee.
when i start up the car with the p06 ecu in the idle jumps to 3k and back down.
im wondering if i messed up somewhere. looking for some help.
i looked on ff-squad to convert the 3 wire to 2 wire, im just missing the plug part but is that really necessary?

http://www.ff-squad.com/tech/wiring/wiring.99-01.jpg

some goodies...

http://teeniecore.com/ravenriley2/20/media/09.jpg
http://bbp.juggcrew.com/m/jugs/21p/img/08.jpg


97spydagst 01-03-2008 02:56 AM

Re: my turbo install in done now i have bugs..help
 

Originally Posted by mistahmac

Man wtf that bitch is almost growing a dick..camo like a motha fucka. Anyways change over you iac or else it will idle high and after a sec should start to idle up and down.

marcj 01-03-2008 05:40 PM

Re: my turbo install in done now i have bugs..help
 
did you reset the ecu? pull the battery terminal for 15 sec.

also look for vacuum leaks if your idle is surging..

J-MAN 01-03-2008 07:15 PM

Re: my turbo install in done now i have bugs..help
 
are you throwing any codes? is is surgeing from the minute you turn it on? normally if its a IACV problem then it will start normal then once it warms up start to surge, well at least everytime i had that problem it did. i would double check for vacuum leaks or a split tube.

97spydagst 01-03-2008 11:03 PM

Re: my turbo install in done now i have bugs..help
 
sounds like the iacv like they said ^^ i just got my y8 head swap done and have the dx iacv and i tryed using the ex ecu and it went crazy plugged the stock ecu back in and it ran fine.

bitchasscracker 01-06-2008 12:43 PM

Re: my turbo install in done now i have bugs..help
 
its a vacuum leak some where

one2many 01-06-2008 12:54 PM

Re: my turbo install in done now i have bugs..help
 

what year y8 manifold ?


pic ?



2poor2tune 01-08-2008 02:44 AM

Re: my turbo install in done now i have bugs..help
 
yep sounds like the problem. my integra used to do that crap to me. reved up to 4000 rpms sometimes on a start up then back down untill in got warm., then stared bouncing but fixed it with a stock iacv

bitchasscracker 01-08-2008 08:53 AM

Re: my turbo install in done now i have bugs..help
 
i have bugs in my pubic hair

mistahmac 01-08-2008 06:43 PM

Re: my turbo install in done now i have bugs..help
 
alright guys it was the iacv. im in the process of gettting a z6 im and z6 tb. hopefully that should fix my problem.


All times are GMT -5. The time now is 02:45 PM.


© 2024 MH Sub I, LLC dba Internet Brands