my turbo install in done now i have bugs..help
 

ok i just finshed installing my hmt system.
log manifold, t3 turbo, 2.25 dp to 3 inch exhaust with fmic

d16y7 with d16y8 intake manifold
y7 TB with 3 wire aicv.
450cc dsm injectors
stock

im trying to convert it to a obd1 p06 ecu chipped by dave lee.
when i start up the car with the p06 ecu in the idle jumps to 3k and back down.
im wondering if i messed up somewhere. looking for some help.
i looked on ff-squad to convert the 3 wire to 2 wire, im just missing the plug part but is that really necessary?

http://www.ff-squad.com/tech/wiring/wiring.99-01.jpg

some goodies...

http://teeniecore.com/ravenriley2/20/media/09.jpg
http://bbp.juggcrew.com/m/jugs/21p/img/08.jpg

Re: my turbo install in done now i have bugs..help
 

Man wtf that bitch is almost growing a dick..camo like a motha fucka. Anyways change over you iac or else it will idle high and after a sec should start to idle up and down.

Re: my turbo install in done now i have bugs..help
 

did you reset the ecu? pull the battery terminal for 15 sec.

also look for vacuum leaks if your idle is surging..

Re: my turbo install in done now i have bugs..help
 

are you throwing any codes? is is surgeing from the minute you turn it on? normally if its a IACV problem then it will start normal then once it warms up start to surge, well at least everytime i had that problem it did. i would double check for vacuum leaks or a split tube.

Re: my turbo install in done now i have bugs..help
 

sounds like the iacv like they said ^^ i just got my y8 head swap done and have the dx iacv and i tryed using the ex ecu and it went crazy plugged the stock ecu back in and it ran fine.

Re: my turbo install in done now i have bugs..help
 

its a vacuum leak some where

Re: my turbo install in done now i have bugs..help
 

what year y8 manifold ?


pic ?

Re: my turbo install in done now i have bugs..help
 

yep sounds like the problem. my integra used to do that crap to me. reved up to 4000 rpms sometimes on a start up then back down untill in got warm., then stared bouncing but fixed it with a stock iacv

Re: my turbo install in done now i have bugs..help
 

i have bugs in my pubic hair

Re: my turbo install in done now i have bugs..help
 

alright guys it was the iacv. im in the process of gettting a z6 im and z6 tb. hopefully that should fix my problem.

Re: my turbo install in done now i have bugs..help
 

ok guys i just got the z6 im with some honda tb, thanks to redek99. but now i have another question.
will i need a fast idle valve on the throttle body. i see a big ass hole on the bottom of it or should block it off with some sheet metal or something. also what lines go to the iacv, i think its the coolant but does it matter?

http://s1d2.turboimagehost.com/t/100831_Photo-0010.jpg


where does the white plug into?

http://s1d2.turboimagehost.com/t/100832_Photo-0011.jpg

Re: my turbo install in done now i have bugs..help
 

these pics are to makeup to the haters on the first set of pics...

http://s1d2.turboimagehost.com/t/100...1259-3_086.jpg

http://s1d2.turboimagehost.com/t/100...err_182_11.jpg

http://s1d2.turboimagehost.com/t/100...r925-4_034.jpg

http://s1d2.turboimagehost.com/t/100...err_182_18.jpg

http://s1d2.turboimagehost.com/t/100838_3.jpg

Re: my turbo install in done now i have bugs..help
 

first pic; you should get the stock "thing" that goes there. rigging it up might get you more vac. leaks.

second pic; intake air temp sensor. if you wanna use you it you will need to switch your harness side plug to obd1.

Re: my turbo install in done now i have bugs..help
 

you guys are nogs. he said he's running a 3wire obd2 iacv on an obd1 ecu. obd1 looks for a 2 wire iacv. you have to convert. no you don't HAVE to have the 2 wire plug clip, you can crimp on some pins and ghetto fab it and it'll work. just make sure its a solid connection

-Luke