HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   My T25 Dyno #'s (https://www.homemadeturbo.com/forced-induction-7/my-t25-dyno-s-27067/)

uncle_louie83 09-27-2004 10:47 AM

Re:My T25 Dyno #'s
 
please dont ban me from this thread for saying this....but really whats wrong with making money to TUNE someone's car...

if i were using uberdata or turboedit and someone came to me saying they wanted me to tune there car....i would charge them for my time it took to properly tune there car....i would only be making money for my time spent. remember the old saying " time is money " and personally i dont hold it against him for doing it...Now although i would share the wealth of my maps with people, but if i tune say my neighbors turbo'd civic from scratch...hell yeah im gonna charge him....but im not gonna just upload a pre-made map into his car and call it done, im gonna sit there and upload a map...and then fine tune it out so he wouldnt have any problems...but before i give out my maps on the net....i would put up a disclaimer im not liable for them blowing up there engine cause the timing or fuel doesnt meet there needs, they would have to fine tune out that map to make it work right.

louie

zer0daze 09-27-2004 10:49 AM

Re:My T25 Dyno #'s
 
hrm, you vote ban... i vote burn him in a fire. :)

oh, and if anyone needs some dyno tuned d16 non vtec maps and some d16 vtec maps for 6 psi shoot me a pm, i will email them off. as well as a b18b on 9psi maps.

projekteg 09-27-2004 10:50 AM

Re:My T25 Dyno #'s
 
nothing wrong with tuning someones car if they don't know how or don't have the tools, but why not share that .bin for others to experiment with?? uberdata is about sharing and you'll notice a section on ther strictly dedicated to sharing .bin's. pat made 230 whp with his stock z6 and he posts his .bin everywhere for people to use if they want, that's how it's suppose to be.

SkunT 09-27-2004 10:56 AM

Re:My T25 Dyno #'s
 

Originally Posted by projekteg
nothing wrong with tuning someones car if they don't know how or don't have the tools, but why not share that .bin for others to experiment with?? uberdata is about sharing and you'll notice a section on ther strictly dedicated to sharing .bin's. pat made 230 whp with his stock z6 and he posts his .bin everywhere for people to use if they want, that's how it's suppose to be.

point made exactly.
at least we know who the real homemadeturbo.com family is....
i vote ban. dis-own him.

projekteg 09-27-2004 10:59 AM

Re:My T25 Dyno #'s
 
you can't get banned over something like this, but at least everyone knows he's a punk now, i'll make sure everyone on the uberdata board knows also ;D

Semnos 09-27-2004 11:04 AM

Re:My T25 Dyno #'s
 
Don't worry guys...It's not all that bad, but if he was tuning for a long time..he should know that putting out his bin wouldn't hurt him, cause every engine is different even if it's the same type...the casting is always different and the atmosphere and where you live plays a big part in your tune.....How many people is making the same power as Pat with Pat's bin?????
I haven't seen any dyno sheets....I've heard people running rich on that map though...
Turbo size, intercooler size,,,piping size, eviroment everything plays a role in tuning...so someones bin won't be as good in anothers car.
You will always have to tune your car if you want it running perfect AFR's....and tuning the timing table is done based on what fuel you're running and also when it's detonating etc....if he's running aggressive timing cause he's on race gas...you'll detonate to death if you'll put that bin in your car and run on 91 octane or 89 octane

turboboy 09-27-2004 11:05 AM

Re:My T25 Dyno #'s
 
seriously...if you say you are charging for that "perfect map" for each specific car, there should be no problem sharing your map for others to use as a base map

projekteg 09-27-2004 11:07 AM

Re:My T25 Dyno #'s
 

Originally Posted by Semnos
Don't worry guys...It's not all that bad, but if he was tuning for a long time..he should know that putting out his bin wouldn't hurt him, cause every engine is different even if it's the same type...the casting is always different and the atmosphere and where you live plays a big part in your tune.....How many people is making the same power as Pat with Pat's bin?????
I haven't seen any dyno sheets....I've heard people running rich on that map though...
Turbo size, intercooler size,,,piping size, eviroment everything plays a role in tuning...so someones bin won't be as good in anothers car.
You will always have to tune your car if you want it running perfect AFR's....and tuning the timing table is done based on what fuel you're running and also when it's detonating etc....if he's running aggressive timing cause he's on race gas...you'll detonate to death if you'll put that bin in your car and run on 91 octane or 89 octane

exactly my point, you can't just run that .bin and have a perfect tune, it would still need work on a different car, but it's a good starting point for someone with a similar set up. that's why i don't understand why he's so greedy, oh well, i just hope he's at least donating to UD since he's making money off of it.

88crxSi 09-27-2004 11:15 AM

Re:My T25 Dyno #'s
 
::)
thats all i got to say.. ridiculous.

giving canadians a bad name :-\

projekteg 09-27-2004 11:18 AM

Re:My T25 Dyno #'s
 

Originally Posted by crx88Si

giving canadians a bad name :-\

na, they already had a bad name, he's just fitting the stereotype ;)


All times are GMT -5. The time now is 07:35 AM.


© 2024 MH Sub I, LLC dba Internet Brands