my new topmount setup *updated +bling
4 Attachment(s)
z6block
benson sleeves srp 75.5 9:1 eagle rods clevitte bearings z6 head stock ports zex 59300 cam zex springs zex retainers ARP head studs OEM head gasket 750cc RC injectors aem fuel rail 255plh walbro in tank oem ignition gt3076R 82.AR SLS topmount SLS 4"dp precision 600hp IC types s bov 35mm tial 8 psi spring profec b2 boost controller.. z6 tranny obx lsd stock flywheel exedy stage 2 clutch.. 3 puck 400 ftlbs rated Hondata S300 Lc-1 wideband buddyclub pro spec grouding kit buddyclub p1 15inch wheels matte black special edition falken azenis rt615's gold 13" lensos 22x9x13 slicks i know im leaving somehting out but thats the gist of it.. Attachment 28596 Attachment 28597 Attachment 28598 Attachment 28599 http://thumbs.vidiac.com/f25d7b55-ba...f5013d83f4.jpgClick here to see Video |
Re: my new topmount setup
Sweet setup but your Vid was worthless :-\
|
Re: my new topmount setup
nice setup
|
Re: my new topmount setup
i love the 4 inch dp
any dino numbers? |
Re: my new topmount setup
tuning it april 15th
|
Re: my new topmount setup
Originally Posted by 88dx
Sweet setup but your Vid was worthless :-\
http://thumbs.vidiac.com/d0e21210-fa...8e0128194d.jpgClick here to see Video |
Re: my new topmount setup
what did you hit and how fast
|
Re: my new topmount setup
Originally Posted by Atticus
what did you hit and how fast
|
Re: my new topmount setup
damn clean setup!
|
Re: my new topmount setup
Kinda expensive, kinda overkill for a sohc
Good luck spinning that turbo, and then when it does spin, getting those autoX tires to stick Nice honda-tech setup though |
Re: my new topmount setup
Post porn.
|
Re: my new topmount setup
alarm clock in the vid ? :S
|
Re: my new topmount setup
Originally Posted by Snafubmx234
Post porn.
|
Re: my new topmount setup
Is that Phish doing Gin and Juice in that second vid?
Nice civic looks just like mine :) |
Re: my new topmount setup
I like the setup, that manifold is ballin'
The vid was good too Its prolly the best sohc drag setup ive seen.
Originally Posted by W O T
Kinda expensive, kinda overkill for a sohc
Good luck spinning that turbo, and then when it does spin, getting those autoX tires to stick Nice honda-tech setup though Cant wait on the dyno chart to see the power curve =b |
Re: my new topmount setup
vid was a bit of ego masturbation but the car def. is quick. :6
|
Re: my new topmount setup
Originally Posted by SloS13
vid was a bit of ego masturbation but the car def. is quick. :6
|
Re: my new topmount setup
naaa mane that there turbo spun tooo long..the ---- u feeding it O0
my ---- at like 3k makes a full rotation....under heavy load :3 |
Re: my new topmount setup
people ran 10's on sohc on your run of the mill t3/t4 kids
|
Re: my new topmount setup
Originally Posted by southwest2118
naaa mane that there turbo spun tooo long..the ---- u feeding it O0
my ---- at like 3k makes a full rotation....under heavy load :3 |
Re: my new topmount setup
Nice, but I don't think that you're 35mm TiAL is a good component in that set-up. Hope I'm wrong.
JP |
Re: my new topmount setup
Originally Posted by samson
Nice, but I don't think that you're 35mm TiAL is a good component in that set-up. Hope I'm wrong.
JP |
Re: my new topmount setup
Nice, but you shoulda went with a 0.63 A/R twin scroll and the manifold twin scroll to match. That would set you up nice and really work those slicks in first and second. The 0.82 is just to big on a D. You are going to get too much lag between shifts. I use a SC60 on my D15B and breaks loose like no tomorrow in 2nd at 10lbs on 555Rs. Make sure to post up avid of it being dyno tuned and then the mayhem afterwards. |
Re: my new topmount setup
i use azenis 615rts they stick pretty good heres mine at 10psi yah i got a big lag in third when i shift but it cause i only revving to 7500 right now 9k will put me right in the sweet spot on the shift :)
http://thumbs.vidiac.com/5a925ba3-3b...f90028a5df.jpgClick here to see Video |
Re: my new topmount setup **updated* wit a few pulls
SEX PURE SEX
|
Re: my new topmount setup **updated* wit a few pulls
Looks like ALOT mroe than 1500rpm outta your "sweet spot", 1 and 2 seem to pull ok, 3rd looks like you went back to an n/a d15
You consider 7k rpm and 10+psi a "break in?" Just ------- turn up the boost and pull it Make a nice video to |
Re: my new topmount setup **updated* wit a few pulls
Originally Posted by W O T
Looks like ALOT mroe than 1500rpm outta your "sweet spot", 1 and 2 seem to pull ok, 3rd looks like you went back to an n/a d15
You consider 7k rpm and 10+psi a "break in?" Just ------- turn up the boost and pull it Make a nice video to |
Re: my new topmount setup **updated* wit a few pulls
What's making the crack sound in between shifts? Like the Type S BOV though, when you hear it, haha. I agree that turbine is too large, that thing takes forevvvvvvvvvver in 3rd. 1st and 2nd suprising rip good though.
JP |
Re: my new topmount setup **updated* wit a few pulls
im gonna post another after the tune had to do a before.. and at 5500 wich is 1k after i shif tto 3rd its hitting full boost.. its just 10psi doesent have enough ummphhh to pull thrd gear maybe the vid doesent do it justice its a low 13 second car as it stands right now. least i think so from the but timer and i raced my buddys b16 turbo crx and he runs 12.8 on street tires he barely pulled on me in third maybe half a car.. 3rd and 4th just need more boost
i did break it in i drive it 100 miles no boost at 4500rpm 50 miles at 6k 50 miles at 6k boostiong 6 psi and then 50 miles at 7k 6psi i just turned it up to 10psi and thats where it stays till i tune afrs are good but i dont want to detonate and kill my bearings. the car is just gonna sit till the tune no more drivingher hard it was just that one night :) |
Re: my new topmount setup **updated* wit a few pulls
Originally Posted by samson
What's making the crack sound in between shifts? Like the Type S BOV though, when you hear it, haha. I agree that turbine is too large, that thing takes forevvvvvvvvvver in 3rd. 1st and 2nd suprising rip good though.
JP |
Re: my new topmount setup **updated* wit a few pulls
Sounds like you got some wheel hop in the vid. Better do something about that, having all that power and some wheel hop = replacing transmissions after the 1st time at the track.
|
Re: my new topmount setup **updated* wit a few pulls
slicks dont wheel hop buddy but azenis do
|
Re: my new topmount setup **updated* wit a few pulls
Originally Posted by DirtydseriesWoot
slicks dont wheel hop buddy but azenis do
Not with traction bars. ;) Get some, your EJ will love you. The sub-frames of them seem to have the most flex of any honda. I haven't had any wheel hop problems, since. |
Re: my new topmount setup **updated* wit a few pulls
ive noticed that
|
Re: my new topmount setup **updated* wit a few pulls
not a street car so its gonna ahve slicks on it 24-7 no need for the bars saving money for good suspension setuip first the bars can wait
|
Re: my new topmount setup **updated* wit a few pulls
Originally Posted by DirtydseriesWoot
not a street car so its gonna ahve slicks on it 24-7 no need for the bars saving money for good suspension setuip first the bars can wait
---- everything else, get traction bars. You are gonna break some ---- trying to launch on slicks without them. A good launch will send that slick right into the wheelwell and put your axles at an angle that is not designed for much torque. |
Re: my new topmount setup **updated* wit a few pulls
preloading ownz u
|
Re: my new topmount setup **updated* wit a few pulls
Originally Posted by DirtydseriesWoot
preloading ownz u
Doesn't matter, still gonna happen. |
Re: my new topmount setup **updated* wit a few pulls
hehe also autozone lifetime axles own u . who ------- cares if i break an axle take like 10 mins to change it :8
|
Re: my new topmount setup **updated* wit a few pulls
Originally Posted by DirtydseriesWoot
hehe also autozone lifetime axles own u . who ------- cares if i break an axle take like 10 mins to change it :8
Get the ------- traction bars. :6 |
All times are GMT -5. The time now is 09:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands