Re:my HMT crx pics
from what car is the dash from? the crx looks real good and fast.
|
Re:my HMT crx pics
Originally Posted by trebor_nordap
from what car is the dash from? the crx looks real good and fast.
|
Re:my HMT crx pics
Thanks, dash is from 94+ integra. I was doing an aluminum dash, but it looked kinda cheesy and I got a good deal on this teg dash ($20 cause it was tan, $10 for black vinyl paint). Aluminum inserts were pretty easy, although the gauge panel was a little difficult to bend to shape. And i don't like the angle of the guages, so I might be modifying it a bit. Just finished those the other night.
|
Re:my HMT crx pics
wow now thats a ballin' setup....any specs? 8)
|
Re:my HMT crx pics
SWEEEET ;D. Looks very good ;).
|
Re:my HMT crx pics
i like those door panels. it all looks very well thought out. nice work.
|
Re:my HMT crx pics
Definately gets an A in my book. It's going to be a sweet car to play around with. Is there a gap in between where the wastegate bolts up? I'd be careful of that... Maybe get a gasket or something to seal it up. And, in the rear of your sideskirt's thats where your exhaust will be exiting right? Thats pretty creative and ought to save some weight.
|
Re:my HMT crx pics
Yeah, in that pic, I was just test fitting. There are now gaskets between all the flanges and everything is tightened up. Yeah the exhuast is coming out the side. Its all 3" from the turbo, and at the exit the tube is transitioned into rectangular shape to help clear the frame rail. The car hasn't left the garage in 4 years. It began with a simple b16a swap with full interior, but I then had a change of heart. I've been in college the last 4 years, so the whole time just worked on it during the summers when I came home to work. I'm finishing up a summer/fall coop at Rockwell Collins this December and then have 1 semester left at Iowa State University in electrical engineering. Not sure what will happen afterwords, either Minneapolis, socal, Cedar Rapids, or Chicago. So sometime soon I will have a nice steady income and can finish up things i've put off brakes/suspension/bottom end.
Specs: B16a stock engine t3/t04e 48/54 255 lph fuel pump 1/2" fuel line 12g fuel cell autometer inline filter aem rail knockoff adj fpr w/guage tial wg & bov converted to obd1 dsm 450cc injectors chipped p28 msd ign & coil 5g civic rad and FAL fan ... will be running 9 lbs until next summer when I put in refreshed block with sleeves/9.0-1 pistons/rods Then probably 15-20 lbs. Currently working on fabbing some custom linear actuators for an automated moveable rear spoiler sysyem. Designing an full underbody aero system. Some things to come in the near future. |
Re:my HMT crx pics
Wow, that car looks really good man. I especially like the exhaust exit... and how clean it is. Nice integra dash swap as well. Hope all is well when you get finished! ;D
|
All times are GMT -5. The time now is 09:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands