My experience with Stan's (Flamenco-T) oil feed & return lines Fast-Turbo.com
#1
My experience with Stan's (Flamenco-T) oil feed & return lines Fast-Turbo.com
Let me say, Stan is the man.
Many know him from Honda-Tech...he is very well known and well respected on there. He isn't as well known here on HMT so I thought I would share with you my experiences with him.
I bought his feed/return kit for my turbo setup when I was still learning. He was very helpful and explained a lot. I acquired his lines as a result of buying a turbo from one of his close friends, and he threw in the oil lines as an incentive to buy from this guy.
With my install complete, I had an oil leak which appeared to be coming from the oil return. Stan spent hours with me on the phone, over AIM, through PM trying to help me resolve my leak. He even sent out a new fitting when these Earls fittings never have defects in case it was a defective fitting like I thought at his cost.
I finally found out that the leak was a result of a bad weld job of the bung on the oil pan...pinholes most likely as the leakage was minimal. In true HMT fashion, I put a little JB weld around the weld and that sealed it up and fixed my issues.
I sent back the 2nd fitting that Stan sent, all scuffed up and he isn't even going to charge me for it.
I would never go to anyone else for my oil line needs except Stan and I urge anyone who reads this to give Stan a holla.
stan@fast-turbo.com
Many know him from Honda-Tech...he is very well known and well respected on there. He isn't as well known here on HMT so I thought I would share with you my experiences with him.
I bought his feed/return kit for my turbo setup when I was still learning. He was very helpful and explained a lot. I acquired his lines as a result of buying a turbo from one of his close friends, and he threw in the oil lines as an incentive to buy from this guy.
With my install complete, I had an oil leak which appeared to be coming from the oil return. Stan spent hours with me on the phone, over AIM, through PM trying to help me resolve my leak. He even sent out a new fitting when these Earls fittings never have defects in case it was a defective fitting like I thought at his cost.
I finally found out that the leak was a result of a bad weld job of the bung on the oil pan...pinholes most likely as the leakage was minimal. In true HMT fashion, I put a little JB weld around the weld and that sealed it up and fixed my issues.
I sent back the 2nd fitting that Stan sent, all scuffed up and he isn't even going to charge me for it.
I would never go to anyone else for my oil line needs except Stan and I urge anyone who reads this to give Stan a holla.
stan@fast-turbo.com
#4
Re:My experience with Stan's (Flamenco-T) oil feed & return lines Fast-Turbo.com
I agree stans pretty cool. He took care of me on my B-series valve train stuff. I'm more than likly going to buy some axles from him as well.
::thumb up::
::thumb up::
#6
Re:My experience with Stan's (Flamenco-T) oil feed & return lines Fast-Turbo.com
Originally Posted by playboyace35
awww what bout stealthmode hehe
Originally Posted by AbaZ
I agree stans pretty cool. He took care of me on my B-series valve train stuff. I'm more than likly going to buy some axles from him as well.
::thumb up::
::thumb up::
#8
Re:My experience with Stan's (Flamenco-T) oil feed & return lines Fast-Turbo.com
Originally Posted by draztik
Stealthmode #1
Other guy #2
Other guy #2
If you have a legitimate gripe with Stan, spit it the ---- out or STFU.
Honestly...my 1st hand knowledge of Stan's business practices and moral principles superseeds your dumb ------- comment.
If it's a matter of quality of oil lines...it goes Stan #1...the rest #2. Anyone who wants to argue that fact can try to do so and fail.