good info!

Good luck with the new build.

 

Been super busy finishing some other projects but I am finally getting back to this. Well, block is back and looks pretty good. Started working on the oil setup. Started out by drilling out the oil pressure sensor hole on the back of the block and tapping it out for 1/4 NPT. I then put a 1/4 NPT to -6AN adapter and ran some braided line (temporary of course until it is in the car)

Next I made an oil distrabution block. It has a -6 inlet to feed it and a -3 out of the right for oil supply to the turbo. Then on the bottom of the block I have drilled and tapped two holes for the oil pressure sensor and an oil pressure gauge. This should help to clean up the usual mess of oil lines on the back of the block.

 

Not bad, got more pic's?

 

Well, been making a little bit of progress and thought I would post some pics. I took the week after next off also so this thing should be on the road laying dirty seconds in no time.

 

Oh Snap!!!

 

Holy ----, it's a real turbo!

 

No more jacki chan ---- here.

 

nice.... he351cw?

 

HE351VGT. I think I have a really good method to control the VGT

 

Now your in business.