|
My build, Almost finished.
21 Attachment(s)
well i finally started the 2.0L focus turbo project,
parts 42lbs injectors TD05hl-15g turbo from volvo 850 ebay intercooler ssac wastgate ebay greddy bov mustang MAF for the first day of the build didnt get to much done, would have finished the fab work but ran out of argon. now for the Day one pics. Attachment 32613 Attachment 32614 Attachment 32615 Attachment 32616 Attachment 32617 Attachment 32618 Attachment 32619 The Car Attachment 32620 Attachment 32621 Attachment 32622 Attachment 32623 Attachment 32624 Attachment 32625 Attachment 32626 Now to the Fab work Attachment 32627 Attachment 32628 Attachment 32629 Attachment 32630 Sexy Smiley welds, Attachment 32631 The work shop Attachment 32632 The most important thing ive learnd on HMT, JB Weld is your friend Attachment 32633 me http://i62.photobucket.com/albums/h9...9/P1050126.jpg watch out for day two and some burnout vids. |
Re: My build, Almost finished.
Damn thats looking good :o. How much boost are you runing. How does it pull.
Steven, |
Re: My build, Almost finished.
|
Re: My build, Almost finished.
what kinda cam gears are those?
look nice! i hope to watch some vid soon! |
Re: My build, Almost finished.
Super nice build. I'm a fan of the unconventional.
I read a while back about a Focus turbo kit that had the turbo mounted very low. So low that it needed an electric pump and reservoir to move the oil out of the turbo and back into the motor. I had to do this on my setup (probably could have avoided it if I mounted the turbo differently), just wondering if you will too. |
Re: My build, Almost finished.
What does one in a focus do for engine management?
|
Re: My build, Almost finished.
Originally Posted by crxvtec91
Damn thats looking good :o. How much boost are you runing. How does it pull.
Steven,
Originally Posted by Walter
what kinda cam gears are those?
look nice! i hope to watch some vid soon!
Originally Posted by x3gimp
Super nice build. I'm a fan of the unconventional.
I read a while back about a Focus turbo kit that had the turbo mounted very low. So low that it needed an electric pump and reservoir to move the oil out of the turbo and back into the motor. I had to do this on my setup (probably could have avoided it if I mounted the turbo differently), just wondering if you will too.
Originally Posted by sakpase
What does one in a focus do for engine management?
|
Re: My build, Almost finished.
those are some sexy welds. i wonder if i can do that with my mig welder
|
Re: My build, Almost finished.
probably, ive only been welding 2 months,
|
Re: My build, Almost finished.
Originally Posted by sakpase
What does one in a focus do for engine management?
|
| All times are GMT -5. The time now is 07:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands