My 2000 turbo si UPDATED 13.9 track run added
06-06-2007, 09:05 AM
#1
0.0 BAR
Thread Starter
Join Date: May 2006
Posts: 0
My 2000 turbo si UPDATED 13.9 track run added
videos added my friend was taping he sucks..one is a burn out video and one is a street pull listen to the security at the end of the video ask if were racing...i have some vids i'll be posting soon..enjoy
here is a 13.9 track run i did on street tires on 7-8 psi i only ran once because my wastegate was acting up so i havent been able to get back to the track boosting 14 psi with slicks yet- http://www.youtube.com/watch?v=8o2m-uxKb34
burnout--- http://www.youtube.com/watch?v=_QUjW1ISYcc
street pull--- http://www.youtube.com/watch?v=KS1ox2_1RSk
This is my build that i have been working on for the last year and a half.
full type r valve tran.
type r throttle body
ABS intake manifold
STR fuel rail
255 walbro fuel pump
B&M FPR
DSM 450 injectors for right now
GSR cams with AEM cam gears
ARP head, rod and main bolts
alluminum radiatior with slim fan
greddy knock off blow off valve
front mount intercooler
racing solutions 2.5" intercooler piping all around
ebay catch can
OEM head gasket
block bored 20 over (81.5mm)
probe forged pistons
probe H beam rods
crank micro-polished and balanced
tuner toys oil drain and oil feed fitting
- 3 oil feed line
ss oil return line
T3/T4 turbonetics turbo rebuilt by blaast performance
turbosmart dual stage boost controller
38mm wastegate
ramhorn style manifold
3" downpipe and exhaust (not installed yet).
3 bar map sensor
AEM wideband
all autometer gauges
b16 tranny, freshly rebuilt by C&M
blox lower rear controll arms
eibach ground controll coil overs
dropzone struts
skunk2 camper kit
lakewood traction bars
OBD1 jumper harness
chipped P28 tuned with ecutune from Xenocrom
on 14 pounds ......
here is a 13.9 track run i did on street tires on 7-8 psi i only ran once because my wastegate was acting up so i havent been able to get back to the track boosting 14 psi with slicks yet- http://www.youtube.com/watch?v=8o2m-uxKb34
burnout--- http://www.youtube.com/watch?v=_QUjW1ISYcc
street pull--- http://www.youtube.com/watch?v=KS1ox2_1RSk
This is my build that i have been working on for the last year and a half.full type r valve tran.
type r throttle body
ABS intake manifold
STR fuel rail
255 walbro fuel pump
B&M FPR
DSM 450 injectors for right now
GSR cams with AEM cam gears
ARP head, rod and main bolts
alluminum radiatior with slim fan
greddy knock off blow off valve
front mount intercooler
racing solutions 2.5" intercooler piping all around
ebay catch can
OEM head gasket
block bored 20 over (81.5mm)
probe forged pistons
probe H beam rods
crank micro-polished and balanced
tuner toys oil drain and oil feed fitting
- 3 oil feed line
ss oil return line
T3/T4 turbonetics turbo rebuilt by blaast performance
turbosmart dual stage boost controller
38mm wastegate
ramhorn style manifold
3" downpipe and exhaust (not installed yet).
3 bar map sensor
AEM wideband
all autometer gauges
b16 tranny, freshly rebuilt by C&M
blox lower rear controll arms
eibach ground controll coil overs
dropzone struts
skunk2 camper kit
lakewood traction bars
OBD1 jumper harness
chipped P28 tuned with ecutune from Xenocrom
on 14 pounds ......
06-06-2007, 07:26 PM
#7
0.0 BAR
Thread Starter
Join Date: May 2006
Posts: 0
Re: My 2000 turbo si
not sure what kind of manifold it is i got it from a friend and he didn't know either what kind it is. there is no name or badge on it but i rewelded it and braced the ---- out of it to make sure it don't crack and what not.
.i'm using a turbonetics wastegate..
.i'm using a turbonetics wastegate..
