my 14b setup questions
hey everybody im new here but not new to hondas. i have a 14b setup on my car now with a stock waste gate accuator is there anyway to turn the boost down below 12 pounds? and how much oil pressure gos to a talon tsi . i have a oil presure regulator with a auto meter gauge and i have it set to 30PSI max at 7000 rpm. is that a good place to have it? thanks in advance everyone
|
Re: my 14b setup questions
boost on my 14b stock waste gate never passed 9 psi
put it at 20 psi |
Re: my 14b setup questions
Stock actuator should be around 8psi, so yes, you can turn it below 12psi.
30psi of oil pressure is just fine. That's about what the turbo would see in use on a stock DSM. |
Re: my 14b setup questions
Originally Posted by bitchasscracker
put it at 20 psi |
Re: my 14b setup questions
thank u guys gfor your help
|
Re: my 14b setup questions
dont be a ----- matt
|
Re: my 14b setup questions
now my next question can i use stock injectors for 8 pounds with a fuel pump and FMU?
|
Re: my 14b setup questions
^ Can you reads engrish????
|
Re: my 14b setup questions
Originally Posted by humbert
now my next question can i use stock injectors for 8 pounds with a fuel pump and FMU?
|
Re: my 14b setup questions
Originally Posted by losesomethinbra
^ Can you reads engrish????
and to you jay its my champwhite 99 coupe son. i hate chipped ecu's i was never a fan. but will the pump and fmu be enough for 6-8 pounds? |
All times are GMT -5. The time now is 04:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands