I got hmt project on car and running and now iam getting to much oil, there is oil on spark plugs, coming out exhaust, and in between exhaust housing and intake housing(dont no real names), its a rhb5 of a t-bird, are the seals bad on turbo or is there just to much oil pressure or any other ideas

 

disconnect one of your charge pipes and see if there is oil
splatered all on its' inside. disconnect the charge pipe going to the throttle body and the that's connected to the turbo compressor housing and inspect those. if the seals are bad and oil is getting in the compressor housing, then it's gonna get in your engine.

 

Uh..I think the oil has allready gone past the charge pipes if its comming out of the exhaust .

What are you using for the oil feed?how big is it?
How bad is the play on the turbo(in out,side to side)?

 

Sounds like a piece of ---- turbo to me. :P
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

there is no play in the turbo at all, am using a -4 stainless line, if turbo is bad were do i look for a rebuild kit for that rhb5 t-bird turbo,

 

The turbo should have SOME play.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

UH it could be leaking out the turbine side

 

It could be,all master of infinite wisdom but since he mentioned it was on his spark plugs....read the whole ------- thing before you decide to start being stupid!

 

so, if its in his spark plugs, then its probably leaking through the valve cover. maybe he is pressurizing the crankcase and causing the oil to go between the seals and into the spark plug hole. unburnt oil ON the insulator nose and i think he has more of a problem then a turbo

 

I think he means oil on the spark plugs, as in oil on the part that goes in the motor, not oil on the part that sticks out of the motor. :P
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote