Mounting the Front Mount
09-23-2004, 07:15 PM
#1
1.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 219
Mounting the Front Mount
hey yall, im in the process of mounting my 6"johhny racecar intercooler on my 89 civic hatchback. i was wondering if anyone had any pics of how they mounted thier. ive cut and fitted, cut and fitted and i still cant get it. any tips would be appreciated
Curtis
Curtis
09-23-2004, 10:03 PM
#3
1.5 BAR
Join Date: May 2003
Posts: 808
Re:Mounting the Front Mount
i also used zip ties :P. not the best way but they get the job done. i think its a little harder to put the ic on a 88-91. b/c of the way the bumper(metal piece) is shaped. there really wasnt room for the"tabs" that u are suposed to use to mount the ic with. i just cut those off and wrapped zip ties around the ic and the whole bumper suport.next year im going to have someone weld other brackets on the ic so i can use bolts.
09-24-2004, 08:22 AM
#5
1.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 219
Re:Mounting the Front Mount
thanks guys im kinda wishing now that i should have got the 5" one 
but ive cut the crap out of my support already im thinking of just cutting the ends of the support(the part that holds the bumper to the car) anf just leaving it like that. Ill post pics up asap of what my bumper looks like
but ive cut the crap out of my support already im thinking of just cutting the ends of the support(the part that holds the bumper to the car) anf just leaving it like that. Ill post pics up asap of what my bumper looks like
09-24-2004, 11:49 AM
#9
3.0 BAR
Join Date: Apr 2003
Posts: 2,612
Re:Mounting the Front Mount
zip ties? come on guys, you'll spend a good day and a half working on the car to do the install and you won't spend 10-15minutes or less to make two holes so you can bolt down the intercooler? if you're in the situation where you have to fabricate a mounting bracket and you don't have a welder but you can mount it with zip ties, atleast go to Home Depot and spend $4.00 on two of the extra large metal hose clamps to use instead of the plastic zip ties.
09-24-2004, 12:43 PM
#10
1.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 219
Re:Mounting the Front Mount
yea, its a 6" one, im going to finish working on it tommoro and hopefully, if i dont get pissed off, i cant get it all on there. I know there has to be someone with a 6" intercooler. also about the hf support, id still prob have to cut more out anyways
