HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   missed 5th gear hit 7600rpm appox loud loud ticks!help vid! (https://www.homemadeturbo.com/forced-induction-7/missed-5th-gear-hit-7600rpm-appox-loud-loud-ticks-help-vid-67206/)

soontobeDA 08-24-2006 05:24 PM

missed 5th gear hit 7600rpm appox loud loud ticks!help vid!
 
so yah im a dumb ass
now car is ticking loud
imma try adjustment tonite

expletive on the way back from dyno
i overred to 7600


what can happen?
bent valve?
need valve adjust

http://smg.photobucket.com/albums/v3...gAnch=imgAnch1



SpankedYA! 08-24-2006 05:27 PM

Re: missed 5th gear hit 7600rpm appox loud loud ticks!help vid!
 
Hucked a rocker.

soontobeDA 08-24-2006 05:33 PM

Re: missed 5th gear hit 7600rpm appox loud loud ticks!help vid!
 

Originally Posted by CSaddict
Hucked a rocker.

fixable?

0b00st0 08-24-2006 05:40 PM

Re: missed 5th gear hit 7600rpm appox loud loud ticks!help vid!
 

Originally Posted by soontobeDA
fixable?


You probably went higher than that. I missed once and hit around 8500. Split second though. The clutch went right the ---- back in after that.

Nothing happened to the valvetrain.


How long did you let it ride?




soontobeDA 08-24-2006 05:45 PM

Re: missed 5th gear hit 7600rpm appox loud loud ticks!help vid!
 

Originally Posted by MADMAX

You probably went higher than that. I missed once and hit around 8500. Split second though. The clutch went right the ---- back in after that.

Nothing happened to the valvetrain.


How long did you let it ride?




not long at all mabe my eyes didnt see it too fast but i saw 7600 and backed out right way

i wasnt redlining 4th either
i think it was at like 6500

not too sure big headaches gotta nap


ososlohatch 08-24-2006 05:50 PM

Re: missed 5th gear hit 7600rpm appox loud loud ticks!help vid!
 
lol did you miss fifth or go into third ... lmao ... my bro raps his ---- too 8200 on stock ls head

Slo_crx1 08-24-2006 05:53 PM

Re: missed 5th gear hit 7600rpm appox loud loud ticks!help vid!
 
Kinda sounds like a rocker...or maybe the lash adjustment screw loosened up all the way. Had that happen to my b16 2 weeks ago. Pop the valve cover off and check to make sure all the rocker arms are in place first. Then check valve lash after if they're still all there. And do it ASAP! :P

soontobeDA 08-24-2006 05:54 PM

Re: missed 5th gear hit 7600rpm appox loud loud ticks!help vid!
 
missed 5th = missshifted to 3rd is what i meant

Anubis_4_99 08-24-2006 05:57 PM

Re: missed 5th gear hit 7600rpm appox loud loud ticks!help vid!
 
you can also spin a bearing if you over rev sometimes as well, i'd try and figure out if its coming from the head or block for sure before getting anything done and wasteing money

although it does sound like its comeing from the head... doesnt quite sound like a spun bearing IMO


Originally Posted by slo_crx1
Kinda sounds like a rocker...or maybe the lash adjustment screw loosened up all the way. Had that happen to my b16 2 weeks ago. Pop the valve cover off and check to make sure all the rocker arms are in place first. Then check valve lash after if they're still all there. And do it ASAP! :P

i've had that happen on the turbo datsun i had, was doing a burnout and a rocker arm popped right out and started beating the spring, sounded nasty but still ran ok.. take a looksee under the cover like he said, maybe whatever it is is visable

traff1c 08-24-2006 08:58 PM

Re: missed 5th gear hit 7600rpm appox loud loud ticks!help vid!
 
i think my brother did that once, it sounded pretty much the same. He drove it like that for a few days, then he was going to take it to a mechanic (this was before i knew ---- about engines) and on the way the spun bearing locked up causing the rod to break and blow a hole in the block. at a ----- ass 25mph


All times are GMT -5. The time now is 07:35 PM.


© 2024 MH Sub I, LLC dba Internet Brands