mini-me/garret t25
ok guys whats my boost limit according to my fuel setup:
D16Y7 Bottom D16Y8 Head Garret T25 FMU 340cc's Walbro 255 Fuel Reg TurboEDIT *Stock internals* i think 11psi is the max on this setup, what do you think? |
Re:mini-me/garret t25
Because you are using an FMU you are limited to 5-6PSI max. You should get a V-AFC.
Good luck with your project. |
Re:mini-me/garret t25
ok dude ^ he's using a chip ecu i really dont think you need the fmu maybe 8 to 9 max
|
Re:mini-me/garret t25
i say ditch the fmu and only use turboedit. cause thats all u need for fuel management. cause u got those injectors. i would say all is good. but just take the fmu out of that list.
|
Re:mini-me/garret t25
EG_SiCKNeSS I forgot to tell you. You should ditch the fmu. All you need is the injectors. And everything is with the ecu controlling your fuel supply. Keeping everything simple is the best deal at this point. Its either keeping your stock 240's and use the fmu. Or use the 340's with ecu. Since your route is with the chipped ecu ;) then just use the 340 with the chipped ecu. But we'll talk about it while we finish up pulling the tranny out :P And sorry man would of take an hour but I think i'm getting old :P
|
Re:mini-me/garret t25
i was reading the facts and it said the best way to go is a standalone fuel management system. so would a modified ecu and larger injectors work well with 8psi-10psi? my friend is using a rom burner to add turboEDIT into my ecu and im using some dsm 340cc injectors, will this work?
|
All times are GMT -5. The time now is 11:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands