Messed up with injector install
 

Well, i was installing my dsms but accidentally cut off the wrong connector (there are 4 connectors for injectors then one for something else on the fuel rail)...does any one have a picture of that connector so that i can know which wire to solder to which side of the connector?

Thanks

Re: Messed up with injector install
 

The connector im talking about is this one:

http://www.defendingrights.com/connector.JPG

Re: Messed up with injector install
 

did you leave enough wire to play with? shouldn't have cut it so short so you coulda jus color matched.

Re: Messed up with injector install
 

i kno i screwed up...there is enuf room to solder it back (luckily) but the insulation slipped off or something so it is bare wire, which is why i cant just color match

Re: Messed up with injector install
 

time to make a run to the bone yard and yank one off a similar civic and make sure you cut it so you have enough to solder on

Re: Messed up with injector install
 

there is enough to solder...i would really aprreciate it if someone would tell me the colors tho...like xx color for the wire nearest the firewall and xx color for the wire nearest the head

Re: Messed up with injector install
 

jus solder some wire on the bitch n do a test. if check light comes on then switch it =x worst advice i could prolly give but seems as if its what ur up against.