cberman

Well, i was installing my dsms but accidentally cut off the wrong connector (there are 4 connectors for injectors then one for something else on the fuel rail)...does any one have a picture of that connector so that i can know which wire to solder to which side of the connector?

Thanks

cberman

The connector im talking about is this one:

turboDA6

did you leave enough wire to play with? shouldn't have cut it so short so you coulda jus color matched.

cberman

i kno i screwed up...there is enuf room to solder it back (luckily) but the insulation slipped off or something so it is bare wire, which is why i cant just color match

JDMFantasy2K

time to make a run to the bone yard and yank one off a similar civic and make sure you cut it so you have enough to solder on

cberman

there is enough to solder...i would really aprreciate it if someone would tell me the colors tho...like xx color for the wire nearest the firewall and xx color for the wire nearest the head

turboDA6

jus solder some wire on the bitch n do a test. if check light comes on then switch it =x worst advice i could prolly give but seems as if its what ur up against.