Mbc all the way closed, car still hits 15psi on an ihi turbo
#14
Re: Mbc all the way closed, car still hits 15psi on an ihi turbo
Can you post a link ? to the 10$ MBC
Ok strange ---- happens when you play with the wg signal.
This is one of the expeiments we tried a one way valve that would not allow air to pass untill it the presure was 10 PSI.
In theory it should have worked.
But car would hit strong boost gauge would show 15-20 PSI and car would stall.
It wasnt untill we hooked up a Map sensor and a dataloger that we found that boost was spiking at 50 PSI for a fraction of a second and that would push all the fuel in the bowl out.
Also like somebody said it depends on the brand of the MBC your runing.
Ok strange ---- happens when you play with the wg signal.
This is one of the expeiments we tried a one way valve that would not allow air to pass untill it the presure was 10 PSI.
In theory it should have worked.
But car would hit strong boost gauge would show 15-20 PSI and car would stall.
It wasnt untill we hooked up a Map sensor and a dataloger that we found that boost was spiking at 50 PSI for a fraction of a second and that would push all the fuel in the bowl out.
Also like somebody said it depends on the brand of the MBC your runing.
#15
Re: Mbc all the way closed, car still hits 15psi on an ihi turbo
Originally Posted by nonvtec
I have a $10 ebay MBC and its been fine for over a year now
http://cgi.ebay.com/ebaymotors/Voodo...QQcmdZViewItem
I run a different one, but this is just an idea. Go to eGay and search for MBC or Manual Boost Controller and you'll find them cheap.
JP
Thread
Thread Starter
Forum
Replies
Last Post
Sinner
Turbo Parts For Sale
1
02-12-2008 12:49 AM
robs99si
Forced Induction
13
06-11-2004 11:33 AM