Hey, I just wanted you guys to know that 88-90 RX7 injectors can be used with 92-95 Honda Civic. Since they are also high impendence, no resistor box is needed. It's basically plug and play. It also plugs right up to my existing Honda Civic injectors harness without cutting them.



It has a little keyway slot that interfers with the factory honda plug. This is a real simple fix, just get a razor blade and cut the little tab right out so the plug snaps on nice and tight. These are not actual pictures of the RX7 injectors. These of course are the bluetop DSM injectors but same idea.

The seals have to be modified a bit so these injectors will fit properly, very similar to the DSM injectors.

----, i should have taken pictures.

Check the numbers on the side of the injectors to see what type of injectors you got.

1984-85 RX-7 195500-0900 Peak and Hold 460cc Orange Top
1986-87 RX-7 195500-1350 Peak and Hold 460cc Red Top
1986-87 RX-7 195500-1370 Peak and Hold 550cc Tan Top
1988 RX-7 195500-1350 Saturated 460cc Purple Top
1988 RX-7 195500-1370 Saturated 550cc Purple Top
1989-91 RX-7 195500-2010 Saturated 460cc Red Top
1989-91 RX-7 195500-2020 Saturated 550cc Purple Top
1993-up RX-7 Twin-Turbo Saturated Primary 550cc Secondary 850cc

Try it!


Any questions email me: JDMEG6SiR@yahoo.com

 

forgot to mention that on some models the keyway (circled in yellow) is slightly on the right than on the center.

 

good ----

 

How many injectors in a RX7? Do you have to get them out of more than one car? Since it's a rotory I have no idea.

 

https://www.homemadeturbo.com/forum/...;threadid=8805

 

it's very similar to a DSM injector. It's also 4 injectors.

 

Are you sure on 4 injectors I heard somethind diferent,can anyone else verify?

 

trust me man. It's 4 injectors. I been going to junkyard for a while now and came across many RX7 and i been taking the motor apart to take injectors. So i know it's 4 injectors. But on the newer model RX7 93+ has Saturated Primary 2 550cc 2 Secondary 850cc

 

RX7's have two injectors for each rotor, if you know how the rotary piston works. They also had two rotors, two injectors, two rotors, 4 injectors in all. EG6 is correct.