HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   MAX boost from a T25 (nissan) (https://www.homemadeturbo.com/forced-induction-7/max-boost-t25-nissan-47295/)

jhmcrx 10-04-2005 01:08 AM

MAX boost from a T25 (nissan)
 
i picked up a t25 from an older 300zx (i think 5 psi) anyway what is the max boost this wg can handle with the vaccum source disconeccted?

bumblezc 10-04-2005 09:09 AM

Re: MAX boost from a T25 (nissan)
 
I would say about 25psi or so, but why would you want to do something like that. VERY unpredictable boosting, seeing as your pushing the turbo WAY past it's efficiency range, your gonna get alot of extra heat created in you intake charge, and the turbo would last about half as long as it should.

Tom-Guy 10-04-2005 11:22 AM

Re: MAX boost from a T25 (nissan)
 
Older 300ZX single turbo got a .60/.63 T3.

Straight T3 is very inefficient above ~15 psig, but some people have overspun those to the tune of 330 whp. 300 whp is a safe bet.

boosted nx 10-05-2005 11:01 PM

Re: MAX boost from a T25 (nissan)
 
I have a t25 and i have done alot of research and they are only good untill 17psi after that they are junk

IndianRide 10-06-2005 12:11 AM

Re: MAX boost from a T25 (nissan)
 
he is reffering to the older 300zx's like I use to have, I had the 84 with a t3 in it, in my research I found that the older t3 becomes inefficent after 12psi and just create alot of heat after that.

turboDA6 10-06-2005 12:54 AM

Re: MAX boost from a T25 (nissan)
 
my stock t25 was good to 18psi daily.. it was off an sr20 tho. sometimes it would creap to 21ish psi. felt awesome. turbo's still good. no shaft play. did it for a few months. i wouldn't recomend doing that daily but maybe a few passes at the track wouldn't hurt it to much.

falkhen 10-07-2005 12:05 AM

Re: MAX boost from a T25 (nissan)
 
SR T25s diffrent turbos T25 or T25G

i have t25g ( the big one) (compressor)a/r .80 trim 50 ( turbine) A/R .64
my CA18ET starts spooling up at 1800rpms and will go past the engines ability.
i have seen 22psi on this T25G

falkhen


All times are GMT -5. The time now is 11:05 PM.


© 2024 MH Sub I, LLC dba Internet Brands