Master Power Help...THanks
 

Does anyone know where i can get a compressor map for a master power turbo?

specs:
Model:810019
57trim compressor .50a/r turbine.48a/r stage 3 wheel.

I would like to know a few things about this turbo...
is it capable of 300hp with out redic high IAT's on an LS motor?
When will full boost be achieved?
Will boost carry all the way to red line?

My specs for my setup so far are as follows
Stock b18b1 (redline 7000rpm)
Drag Log Manifold
Drag 2.5in DP...(open downpipe)
2.5in Piping all they way around.
Jonnhy Race Car 6in FMIC
DSM 450cc tuned on crome

Im looking for a fast street car that is capable of 300whp and full boost by 4k-7k with out fall off.

I am planning on using a masterpower turbo b/c i do not want to pay 600 for a garret, if i can do the same thing with 400 for a masterpower turbo.

Judging from what i read, i should be able to get to 300whp at around or maybe 15-18psi. But im not sure, can someone please help me verify this as well.

link to the turbo.. http://partsexpressonline.com/...88981

Thanks

Re: Master Power Help...THanks
 

More detailed specs on the turbo...


Master Power Turbochargers
Turbine Wheel:
-Model: MP300
-Exducer Diameter: 56mm
-Mayor Diameter: 61.5mm

Compressor Wheel:
-Model: MPA
-Exducer Diameter: 58.1mm
-Mayor Diameter: 84.0

Turbine Housing:
-A/R: .48
-Type: Undivided
-Discharge: 4-bolt
-inlet: T3

Compressor housing:
-A/R: .50
-Air Inlet: 76mm

Re: Master Power Help...THanks
 

link is dead.


400 for a ching chang meaw turbo? ouch

Re: Master Power Help...THanks
 

You're thinking of XS Power.

LSD sells this Master Power turbo for $519.