Manual boost controller
 

https://images.channeladvisor.com/Se...ges/bc-001.jpg


Can someone please just tell me if this is the right setup for this boost controller

Sorry for the crappy scbribble drawing

http://i69.photobucket.com/albums/i7...08184113-1.jpg

Re: Manual boost controller
 

WTF does the tee do? :l

Is it a check valve?

Do this:

http://homepage.mac.com/limefrog/tem...controller.jpg

You might need to vent the line between the regulator and the top chamber of the wastegate.... maybe. :X

Re: Manual boost controller
 

i dunno wtf that tee is, it just comes with it.

http://www.turbosmart.com.au/index.p...download&id=18

There are the instructions, but i dont get um. I need it for an external tial wastegate

Re: Manual boost controller
 

Ok on an internal gate how does it go?

Re: Manual boost controller
 

it doesnt, unless you can add a nipple on the internal on the opposite side of the diaphram

Re: Manual boost controller
 

So I can't use this style of MBC on an internally gated 14b? I have one of these (not hooked up) and a homemade one on now made from plumbing pieces and a ball and spring but I want something that isn't all ------ed.

Re: Manual boost controller
 

With an internal gate, you just need to put a ball-and-spring valve (Grainger valve, or http://www.boostvalve.com) in-line to the actuator. You could do that with an external gate, too, and leave the top chamber open - that's how I used to have mine set up. :y

Colin

Re: Manual boost controller
 

ask donald, the HMT ching chang meow dealer, he sells them so he should know how to hook them up properly

Re: Manual boost controller
 

you might be able to torgan, what sort of mbc are you using?

Re: Manual boost controller
 

Donalds ching chong one. I tried using it turned all the way down the way he told me and every time it would act like the WG was unhooked... 15+psi spike when it should've been about 8. My pipe fitting one is working fine though, holds 11psi steady.