Re:Manifold with Turbo
 

Hey whiterice, is there a reason why i would have to use a 90 degree fitting for the oil inlet, can you explain? Does stealtmode oil lines give you a 90 degree fitting? Thanks

Re:Manifold with Turbo
 

if you were to relocate the wg actuator above the turbo, the oil feed line which points straight up, might be in the way.

Re:Manifold with Turbo
 

oh ok, i get it now, is it better to get a 45 degree instead of a 90 degree one so that the flow won't be restricted in anyway?

Re:Manifold with Turbo
 

another question, is the oil inlet hole (Middle Hole) threaded for the oil line fitting? I tried cleaning mines to see, but the oil isn't coming off.

Re:Manifold with Turbo
 

which ever works. the oil return is what you don't want restricted.
some t3s have the inlet threaded. if not you will need a tap. i usually do it from the bottom so the shavings do not fall inside. you can put some grease in the tap veins to catch shavings also.