making down for saab t3 help
 

yea i just got a saab t3 and the wastegate flaper is on the exhaust DP flange and it kindda close to the cluth slave cylinder so it a really tight space should i rotate the turbo the other way like the stock saab does ? please help thank

Re:making down for saab t3 help
 

You're going to have to explain better than that with more details. I have a saab t3 and I don't have a clue what you're talking about. Do you mean turn the turbo 180° so the compressor side is furthest to the left? In these situations, a picture REALLY helps. Beyond that, you just have to try it as many ways as you can until you find one that works in the space you have or you need to make more space. It's not rocket surgery ;)

Re:making down for saab t3 help
 

ok how do you make a dp for your set up external or internal waste gate ? my turbo compressor side is facing the power streering pump right now and the space to make a dp is too tight on that side because it will hit the cluth slave cyliner if i rotate the compressor side to the stater side then it wil have space but anyway to do it with out rotate the turbo ? lol sorry i can't explane good hahaah

Re:making down for saab t3 help
 

Here is my setup with a Saab turbo.Check it out and see if it helps.https://www.homemadeturbo.com/forum/...threadid=17940

Re:making down for saab t3 help
 

oh man i used the std manifold so it real close to the block i wasn't able to used my waste gate and the dp are very hard to do really close to the block

Re:making down for saab t3 help
 

I also run the Saab T3 and I sold my standard manifold because it wont work with the internal wastegate. I just made my own manifold.

Re:making down for saab t3 help
 

I used a hammer and made a small dent on the DP, at the spot where the nipple for the slave cylinder meets it.

Re:making down for saab t3 help
 

hahaha crazy ---- !!! ---- man i try to rotate the center housing but it like foze in wouldn't come out ! i hit it real hard too ---- i guess i have to buy a real manifold e bay got the OBX manifold i don't know if it anygood ?