HomemadeTurbo - DIY Turbo Forum - make a 1st gen dsm bov sound like a greddy?

Page 2 of 2

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - make a 1st gen dsm bov sound like a greddy? (https://www.homemadeturbo.com/forced-induction-7/make-1st-gen-dsm-bov-sound-like-greddy-28903/)

tranceminister

10-29-2004 05:12 PM

Re:make a 1st gen dsm bov sound like a greddy?

Quote:

Originally Posted by djfob

next for me to get would be an hks ssq but for now I still love the sound of my type s

my SSQ flutters a bit but at full boost it screams. The spring was way too tight right out of the box, so i had to cut it a bit to reduce the compressor surge. Even adjusted all the way loose wasn't enough.

robs99si

10-29-2004 05:43 PM

Re:make a 1st gen dsm bov sound like a greddy?

rfl is where it's at. i got the knock off on ebay and it's loud, even when i let go the gas at 3 or 5 psi, just one big pshhhhhh. people can't help but break neck when they hear it.

djfob

10-29-2004 10:09 PM

Re:make a 1st gen dsm bov sound like a greddy?

Quote:

Originally Posted by tranceminister

Quote:

Originally Posted by djfob

next for me to get would be an hks ssq but for now I still love the sound of my type s

Werd my Type S fluttered too but good thing there's two springs inside so I just took the smaller one out. I noticed most bovs don't like to open under 6lbs or so.

All times are GMT -5. The time now is 04:01 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page