HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   major dsm question!!!!!!!!1 (https://www.homemadeturbo.com/forced-induction-7/major-dsm-question-1-a-27274/)

iheartboost 09-29-2004 07:43 PM

major dsm question!!!!!!!!1
 
ok, if this is the wrong forum i apologize i wasnt sure cuz its not a honda, ok here goes

my buddy has a GS 2nd gen eclipse

my other buddy has a 1st gen laser turbo that he blew the head gasket on and is parting it out

what will i need to pull off the laser to turbo the eclipse
i realize the throttle bodies are on opposite side in the GS but i can make some charge puipes for it.

can i just bolt all the turbo components from the 1st gen laser to the 2nd gen eclipse or will i need the injectors and ecu and stuff

we have an entire motor to play with, so finding parts is not a problem, i just need to no what needs to be added to the gs motor to make it turbo (just turbo components, or injectors and ecu or what)

Reddy 09-29-2004 08:00 PM

Re:major dsm question!!!!!!!!1
 

Originally Posted by iheartboost
ok, if this is the wrong forum i apologize i wasnt sure cuz its not a honda,


This isn't a god damn honda only website ::)

iheartboost 09-29-2004 08:31 PM

Re:major dsm question!!!!!!!!1
 
ok, well i apologize, still need help though

turboboy 09-29-2004 08:49 PM

Re:major dsm question!!!!!!!!1
 
the only things you can use are the turbo, injectors, bov, and ic. the motors are totally different and the manifold wont work, so make a manifold and work on the fuel setup

Xplocivic 09-29-2004 08:51 PM

Re:major dsm question!!!!!!!!1
 
try a DSM specific website, no seriously, you'll probably get a better response there EVEN THOUGH THIS IS NOT A HONDA ONLY WEBSITE. But, 90% of the users here have Hondas, probably only about 15% actually have turbo Hondas.

SmokeShank 09-29-2004 09:07 PM

Re:major dsm question!!!!!!!!1
 
www.columbusdsm.com

your gonna need alot of ---- done. nothign will just swap over, if so, every dsm NT would be turbo'd by now. as far as i know the manifold doesnt match up. you need a hahn turbo kit or something of the sort.

you can use the turbo, and injectors. use an AFC.

a turbo ECU on a NT car will not work. pointless, get that thought out of your head :)

go to the link above and read and read BEFORE YOU POST. if not, you'll get chewed out.

turboboy 09-29-2004 09:19 PM

Re:major dsm question!!!!!!!!1
 
its not that hard to turbo those cars, just like a honda or any other NT car. an easy way to see what you need is to go to the hahn racecraft site and look at their cars/ staged upgrades....but dont buy anything from them


All times are GMT -5. The time now is 09:41 PM.


© 2024 MH Sub I, LLC dba Internet Brands