ls\turbo thinking of putting a b16a head on
 

I have an ls turbo integra with 450cc dsm injectors on resistors with a safc2 with a T3 turbo, and I m thinking of putting a B16a vtec head on. I hear its good then I hear it's bad, but I want more power, and vtec is the only way I think I can get it. My integra is a 1990.what ECU would directly plug in my car, I have obd0, would it be the pr3 ecu would it directly fit?

Re:ls\turbo thinking of putting a b16a head on
 

I can't help you out too much with the ecu, don't know much about obd0, other than try and get the B17 GSR ecu that should work well.

I have a B18B with a B16A3 head on it and it kicks pretty good, a lot better than the stock B16. Screwed a few H22 swaps quite well. You'll enjoy it, make sure you get a fat ass exhaust tho

Re:ls\turbo thinking of putting a b16a head on
 

igot 2.5 exhaust all the way out no cat

Re:ls\turbo thinking of putting a b16a head on
 

id make sure if ya did the ls vtec, ya get either itr or gsr, oil pump, water pump, ---- like that, from what i hear its not good just to slap a head on it

Re:ls\turbo thinking of putting a b16a head on
 

pr3 and pw0 should just plug in-just need to add 3 wires to the plug-i think

Re:ls\turbo thinking of putting a b16a head on
 

why go through all that trouble to do lsvtec AFTER youre already boosted.. how many psi currently? why not just build your block for more boost.

Re:ls\turbo thinking of putting a b16a head on
 

^what he said

Re:ls\turbo thinking of putting a b16a head on
 

dont waste your money on an lsvtec. your already turbo'ed just add more boost!

Re:ls\turbo thinking of putting a b16a head on
 

I got a PWO ecu for ya $175 shipped from europe

Re:ls\turbo thinking of putting a b16a head on
 

im building my block with srp 8.5.1 piston and eagle rods and a gsr oil pump. but i always wanted vtec should that work out with the head let me know thanks