Looking for some input!
#1
Looking for some input!
I have a d16y8 in a 97 Civic Coupe
I want to reach 180 to 200whp while retaining A/C and P/S..
Also, I don't want to build the motor..maybe just a cosmetic headgasket, and ARP headstuds.
I'd like the power to be mid-range because it will be my daily driver..
I would like to know my options!
Thanks in Advance..
I want to reach 180 to 200whp while retaining A/C and P/S..
Also, I don't want to build the motor..maybe just a cosmetic headgasket, and ARP headstuds.
I'd like the power to be mid-range because it will be my daily driver..
I would like to know my options!
Thanks in Advance..
#4
thats probably not going to happen.
a good used journal bearing turbo can cost anywhere from 300-500.00.
a custom tune can be anywhere from 250.00-500.00.
larger injectors-100.00-200.00
boost piping-200.00 if you do it yourself. a lot more if you purchase vehicle specific piping
intercooler-100.00
turbo manifold-100.00-200.00
downpipe-100.00-200.00
wideband afr gauge-200.00
boost gauge-50.00
misc-300.00-500.00
cometic hg-100.00
arp studs-100.00
a good used journal bearing turbo can cost anywhere from 300-500.00.
a custom tune can be anywhere from 250.00-500.00.
larger injectors-100.00-200.00
boost piping-200.00 if you do it yourself. a lot more if you purchase vehicle specific piping
intercooler-100.00
turbo manifold-100.00-200.00
downpipe-100.00-200.00
wideband afr gauge-200.00
boost gauge-50.00
misc-300.00-500.00
cometic hg-100.00
arp studs-100.00
#6
im not much into the jap cars but from what i see listed a lot of people use a t25 or a t3/t4 turbo. i dont think you will have any issues with losing your ac using either of these turbo's. i think you will need the top mount turbo manifold in order to clear the ac compressor.
#7
If you have fabrication skills and tools, I'd say this is a possibility. If you're going to reply on purchased items to make this all happen, than I have to agree...no way. For under $1000, you could find a decent used turbo, fabricate up a log style manifold, and do some "creative" plumbing for your intake and pressure pipes. There wouldn't be an intercooler. For fuel in your budget, I'd explore the possibility of having a large injector plumbed just after your throttle body for the additional fuel needs. For non boost driving (cruise), your stock fuel system would function normally, and when under boost, the additional injector would provide the needed fuel to keep your engine alive. I've seen these injectors controlled with a cheap adjustable pressure switch. If you don't have the technical abilities to make "creative" work, than I wouldn't even start to attempt this project.
This can be done cheap, but will require much more input on your part.
Good luck.
SG from NE
This can be done cheap, but will require much more input on your part.
Good luck.
SG from NE
#8
im not much into the jap cars but from what i see listed a lot of people use a t25 or a t3/t4 turbo. i dont think you will have any issues with losing your ac using either of these turbo's. i think you will need the top mount turbo manifold in order to clear the ac compressor.
The top mount wouldn't work out, I believe I need log style manifold..
Thanks for the input though.
#9
If you have fabrication skills and tools, I'd say this is a possibility. If you're going to reply on purchased items to make this all happen, than I have to agree...no way. For under $1000, you could find a decent used turbo, fabricate up a log style manifold, and do some "creative" plumbing for your intake and pressure pipes. There wouldn't be an intercooler. For fuel in your budget, I'd explore the possibility of having a large injector plumbed just after your throttle body for the additional fuel needs. For non boost driving (cruise), your stock fuel system would function normally, and when under boost, the additional injector would provide the needed fuel to keep your engine alive. I've seen these injectors controlled with a cheap adjustable pressure switch. If you don't have the technical abilities to make "creative" work, than I wouldn't even start to attempt this project.
This can be done cheap, but will require much more input on your part.
Good luck.
This can be done cheap, but will require much more input on your part.
Good luck.
My plans are
Intercooler Piping and Intercooler
BAR&PLATE FRONT MOUNT INTERCOOLER+2.5" UNIVERSAL PIPING: eBay Motors (item 160503040302 end time Nov-13-10 16:00:50 PST)
Manifold
GODSPEED CAST T28 TURBO MANIFOLD D SERIES CIVIC CRX: eBay Motors (item 400171931201 end time Nov-16-10 19:06:04 PST)
T25 Turbo
JDM NISSAN SR20DET S13 T25 Garrett TURBO SR20: eBay Motors (item 180579900296 end time Nov-26-10 08:55:50 PST)
Downpipe, I have a buddy that welds. He can weld up a downpipe
http://cgi.ebay.com/ebaymotors/turbo...item4aa630161a
DSM injectors
DSM 450cc Fuel Injectors: eBay Motors (item 130453400843 end time Nov-14-10 12:15:52 PST)
Turbo Oil feed and return lines..
COMPLETE TURBO OIL LINE KIT T3/T4 T04E T04B T70 K27 T60: eBay Motors (item 280588179818 end time Dec-11-10 150:00 PST)
Plus tune.. and other small misc things I need.
Last edited by phong3992; 11-13-2010 at 01:26 AM.
#10
As I said...as long as you don't mind doing a lot of engineering along the way, and are either adept at fabrication and have the tools, or have friends who will do it for free, than its possible. As far as the tuning is concerned...what exactly is your plan there? Do you already have a tunable ECU? The stock OBD2 Honda ecu won't allow you to do squat...this is why I suggested just doing an additional injector(s) and either a homebrew injector control with some pressure switches, or doing an HKS or something similar. Buying an HKS would certainly blow your budget though.
Thread
Thread Starter
Forum
Replies
Last Post
blackice90hb
Hybrid/Tech
10
09-11-2007 11:03 PM