leak or lag
 

well as randysohc has posted on here about the turbo setup on the dpfi i am the one with that setup and i have everything on to make boost but i only get maybe 3psi i can hear the turbo spool really quick and there is no way it can leak from the turbo to the tb b/c im running for now with no bov and no ic ill have pics soon but i wanted to see if anyone had some suggestions! oh yea this is a hmt setup in the making!!!FTW :y

Re: leak or lag
 

We need to know more details about your setup and lots of pictures because most of the nogs here are illiterate.

Re: leak or lag
 

maybe your wastegate is set @ 3 psi :8

Re: leak or lag
 

^^^^^
that could be. specs and a couple pics would be good

Re: leak or lag
 

well im still tryin to get the pics up im not really good with computers but my turbo is an ihi rhb5 and the internal wastegate is factory set at 7 psi i have done a remote mount the turbo is behind the passenger side headlight everything is working properly just low to no boost i wii lhave pics soon though!thanks

Re: leak or lag
 

do you have any exhaust leaks before the turbo. that will cause spool problems

Re: leak or lag
 

no i have no exaust leaks at all i did in the downpipe but i welded it up the turbo spools and it sounds like it cant spool no more but im only getting 3psi at the im!

Re: leak or lag
 

Does it have a recirculating BOV on the compressor housing?

Re: leak or lag
 

no there is no recirculating bov i just took my charge pipe off and when you rev the car you feel air out of the pipe but keep it at a steady rev and the air tops when you rev higher you feel air again?

Re: leak or lag
 

did you have to clock the turbo any? that might change the length in the wastegate arm thingy. i say throw a manual boost controller on, crank up the boost. if the boost goes up then back down then you got a leak!!! i got a leak too mine goes up to 10lbs then down to 7lbs.