Just got turbo rebuilt
I just got my turbo rebuilt and I upgraded to
watercooling 360 degrees Thrust bearing Stage 3 turbine wheel Step gap turbine seal Ok so when I got it back, I hooked it all up except, I don't have the lines for the water yet. I just hooked it up like I orginally had it, and the guy who rebuilt my turbo said this would be fine. I ran it when I first got it back and the turbo was not spining at idle, then after driving it for awhile it started to spin. Then I noticed that there was oil on my front cross member and I was thinking noooo... So I looked at the water outlet hole and there is oil residue in it ..... but then I was thinking maybe its just my return line leaking... Can oil leak out of the water outlet hole on the turbo ??? Bowen |
not supposed to there two different jackets in the center section
|
If it was a defective rebuilt could it ... Or is it even possbile for oil to be leaking from there,? due to a failure. Becaause the only other thing I think it could be is oil from my return line is splashing up.
|
like he said its 2 diff jackets, the only way it "could" leak there is if the turbo is cracked from the inside,,,
but not spinning at idle? thats not a good sign.,.. |
no its just a little tight most new turbos are rebuilt a little snug so that over time it will wear a little bit and leak or create to much shaft play however if it was difficult to spin by hand when it was just rebuilt that would cause concern imo
|
sounds to me like you need ao get a refund on that rebuild or leran how to install a turbo it one or the other
|
Well it was damaged in shipment ... a new one is on the way. Thanks for all your input
|
As for turbof22a, Looks like you need to learn how to not talk %&!@!. Does that make you feel good? reguardless that was a unessarry comment. What statment did I make to lead you to think I dont know how to install a turbo? Just because I have not messed with the internals on the inside? People come here for help and to learn and if they use the search and can't find something then there is nothing wrong with asking a question.
Been comming here for along time and support HMT all the way.... If it was not for this site I Would not know what I do know been coming here for 6 years didn't jeff the owner say "I have designed this site to help others in making their cars go faster for less money." Putting people down isnt helping |
thank you all turbof22a does is talk ----. ooh btw hows your car run cant wait till it spits a rod and you go "i have no idea how that happend"
|
Originally Posted by bowen1481
(Post 1276310)
What statment did I make to lead you to think I dont know how to install a turbo?
Originally Posted by 2BarRacing
(Post 1276328)
thank you all turbof22a does is talk ----. ooh btw hows your car run cant wait till it spits a rod and you go "i have no idea how that happend"
|
I get what you are saying... the fact is I dont post much on the site and have came along way from when I first came here... I will just get on get the info I need or read some stuff and get off...
|
Wife hates the fact I spend so much time on here but love to drive the turbo civic on the weekends
|
yeah i was litterally just saying either you fucked up putting it on or they fucked up rebuilding it. im going with they fucked up. its nice to see another memeber from before faggot rick bought the place and it turned to honda-tech.com pm me if you want the addy for the new site every one went to when the switch over took place
|
i still dont understand how if you have something that very rarely happens and you ask a question it needs ---- talk?
|
i dont understand how you such a ------- baby about everything seriously grow the ---- up and stop crying and wining about everything posted on an internet forum who was ---- talking i said and i quote "sounds to me like you need ao get a refund on that rebuild or leran how to install a turbo it one or the other" where is there any ---- talking in that sentence. the only ---- talking so far has came from your dumbass mouth after you got done licking your grandfathers dick when he was done ------- your sister
|
omg i am soo hurt by that tell ya what anytime you wanna run our cars heads up for 10k$ let me know hell i will put head lights back in it and drive it to the track
|
Originally Posted by 2BarRacing
(Post 1276379)
omg i am soo hurt by that tell ya what anytime you wanna run our cars heads up for 10k$ let me know hell i will put head lights back in it and drive it to the track
|
i am not asking why it has a rod knock just asking if anyone else had had the same situation. and 200whp for a BONE stock sohc non vtec my friend is not to shabby
|
yeah and its also right around where you bend those tiny rods maybe thats your knock
|
i was thinking that but i bent a rod on an old ls i had and it didnt knock i dont want all this bs between us i bet if we actually agreed we could fix alot of bs noob questions on this site
|
All times are GMT -5. The time now is 09:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands