HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Junkyard Turbo Wastegate WG Pressures (https://www.homemadeturbo.com/forced-induction-7/junkyard-turbo-wastegate-wg-pressures-26519/)

Briman2021 01-30-2006 02:57 PM

Re: Junkyard Turbo Wastegate WG Pressures
 
A little bit of misinformation about starion/conquest turbos.

First of all, its a TD05-12A

up to 87 ran 7 psi, and after that they have 3 port wastegate designed to run 7psi up to 4k rpm and 10psi after that, but you probably won't be able to use the boost solenoid for them, so you won't be able to use this feature.

This is how you should set it up with a MBC http://216.77.188.54/coDataImages/p/...67MVC-004S.JPG

The hose goes to your MBC.

If you don't have a MBC and just have this hose run to the charge pipe, you will get 10psi, if you do the other hose, you will get 7.

Reddy 03-09-2006 05:18 AM

Re: Junkyard Turbo Wastegate WG Pressures
 
Dodge Cummings:

94 17 psi HX35W 12
95-98 17 psi HX35W 12
96-98 23 psi HX35W 12
98-00 ETC 20.8 psi HX35W 12
01 ETC 23 psi HX35W 12
01 ETH 26 psi HX35W 12

WTF 04-19-2006 10:52 PM

Re: Junkyard Turbo Wastegate WG Pressures
 
http://www.turbobricks.com/resources...tent=turbodata

thought this might be helpful too. shows trims of alot of turbos

ugabuga 04-20-2006 09:30 AM

Re: Junkyard Turbo Wastegate WG Pressures
 
Toyota CT-9 turbo found on Toyota Starlet 4efte engines = 6psi low boost, 9psi high boost

Luni 04-25-2006 01:21 PM

Re: Junkyard Turbo Wastegate WG Pressures
 
Im a toyota guy myself.

CT26 stock wastegate pressure yield is 7 psi on the spring. The 5 PSI posted is incorrect.

ichbinsobose 04-30-2006 09:41 AM

Re: Junkyard Turbo Wastegate WG Pressures
 
Journal bearing GT28...9psi. Off suzuki "trucks" and Mclaren edition pontiacs. Same WG.

hotlavaflow 05-13-2006 07:35 AM

Re: Junkyard Turbo Wastegate WG Pressures
 
How do you know if you have a Stage 1, 2, or 3 Garrett T28?

hyper4mance2k 05-29-2006 07:07 PM

Re: Junkyard Turbo Wastegate WG Pressures
 
86-91 Mazda Rx-7 is 5psi. With a 3" exhaust they'll do 7psi. But the wastegates must be ported with w free flowing exhaust to prevent boost spikes.
86-88.5 http://fc3spro.com/TECH/HOWTO/ZWG/zwg.html
88.5-91 http://fc3spro.com/TECH/HOWTO/KWG/kwg.html

drintegra 06-13-2006 04:07 PM

Re: Junkyard Turbo Wastegate WG Pressures
 
good info to know

CO_CReX 06-26-2006 12:02 AM

Re: Junkyard Turbo Wastegate WG Pressures
 

Originally Posted by Luni
Im a toyota guy myself.

CT26 stock wastegate pressure yield is 7 psi on the spring. The 5 PSI posted is incorrect.

A buddy of mine has a auto Supra and his stock boost gauge reads 5 PSI. Is that because its a auto? Do the manuals hit 7 PSI?


All times are GMT -5. The time now is 10:27 PM.


© 2024 MH Sub I, LLC dba Internet Brands