Jay's 90Integra build. HMT 916 NORCAL carnage pics.updated 56k DIE!!!
16 Attachment(s)
Sorry about the big pics. i too lazy to resize
Aight.. So what do you do when you have a whole shitload of parts just sitting in the garage for your project car and you have a ------ beater..........Boost the beater. Crx isnt getting done anytime soon. It all started out with a 90 Integra with a Bone stock b20. please excuse the neon green paint all over the motor.. it was like that when i got it and never cared about strippin the paint.. the more ghetto lookin the better right? Im waiting to order a 2.5 motorola map [xeno] downpipe flange[weir] intercooler kit [racing solutions] Attachment 11666 Old skoo paint job... you can actually see the blue pearl on the pass. side mirror Attachment 11667 HMT decal on the Valve cover with the minty fresh red paint... Attachment 11668 Attachment 11669 everything yanked off Attachment 11670 Stevemode's oil drain.. Attachment 11671 nobody bought "chris'" CDM mani that he posted in the FS section... ---- it and took a trip out to pick it up from him. Thanks Chris..Scored the mani hmt dirty cheap from him. Got the CDM wastegate on there with a Ching Chong Meow t3/t4 Attachment 11672 Attachment 11673 EG half rad in full effect. It actually fits real good in a DA Teg Attachment 11674 Attachment 11675 Better view of the CDM goods.... Attachment 11676 Hit up Peter, "TURBO4LIFE" For a quick socketing job Attachment 11677 Tuner Toys block fitting that I also got from STEVEMODE Attachment 11678 Monster CDM INTERFOOLER Attachment 11679 Got a stock WRX BOV. Thanks Chris Attachment 11680 fluxcore madness right there Attachment 11681 HMT puttin it down in this MOFO updates to follow...... |
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
get some bigger injectors, other than that build looks good.
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
oops. i forgot to note that...
also in the market for some 450's |
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
your bov will take 21psi+
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
racing yellow t belt nog and he needs a t3 5 bolt discharge flange quick..
i also spy hmt hammer beveled pipe.. classic |
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
My downpipe wouldn't work for ya, i had my turbo the other way 'round. And correction, the tubing cost me 160 not 260.
Good genuinely HMT build here. |
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
---- it just cut the downpipe mid way spin it around fluxcore the hell outof it and youll be golden
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
Needs more zip ties and JB weld. :6
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
Sweet
Why do you need a 2.5 bar map sensor? Isn't that a stock motor? Oh, I see your gonna go nog setting! :y |
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
the basemap i had took from xeno's website the church7 bin. it is for a moto 2.5 so i just used that
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
Soldering silicone board with a radioshack soldering iron.
Fail. |
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
what do you guys think about the homemade crush bent ic piping 2". i think imma pick some up
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
Originally Posted by wafflesincars
Soldering silicone board with a radioshack soldering iron.
Fail. |
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
Originally Posted by turbo4life
talk is the biggest failure O0
Unless their mouth is full of sperm, which it usually is. But you swallow don't you. |
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
Originally Posted by wafflesincars
Russian faggots do the most.
Unless their mouth is full of sperm, which it usually is. But you swallow don't you. and then there are nigs like you taht just tak a bunch of ---- witch is what hmt it about |
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
99% of russians know how to turn a wrench, 99% of ukrainians don't.
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
Originally Posted by BoostForLife
99% of russians know how to turn a wrench, 99% of ukrainians don't.
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
Originally Posted by enikolayev
troof
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
car is running now... few bugs that i need to work out. also need eugene to come by and rework the map a bit. updates tonight
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
troubles with map sensor?
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
Originally Posted by enikolayev
troubles with map sensor?
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
Originally Posted by wafflesincars
I imagine he means the fuel/timing.
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
im pretty sure he was just playing with you about the problems with your goods.
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
most likely. One of these days i will stop taking everything seriously.
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
damn eugene.... just playing bro-ski
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
Russians try to hustle everyone.
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
The manifold has oc smell from cdm factory
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
Originally Posted by chris
The manifold has oc smell from cdm factory
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
yeah ... after the motor felt boost, i got a ------ valve tick........ so i go to adjust the valves and ----...i wasnt holding the wrench flat enough and slipped a rocker and a ------ retainer slipped off. back to the drawing board. now i have to figure a way to get it back on without pulling the head./..
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
Compressed air+valve spring compressor=job done
But pulling a head on a boosted motor isnt a horrible idea. Nice fresh headgasket is always peace of mind and cheap. |
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
Originally Posted by chris
Compressed air+valve spring compressor=job done
But pulling a head on a boosted motor isnt a horrible idea. Nice fresh headgasket is always peace of mind and cheap. |
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
this motor is a ------ wrap.... looking for another ls.
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
Originally Posted by apexsilver06mr
this motor is a ------ wrap.... looking for another ls.
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
That ---- was like 3-4 days
What happened? |
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
it was weird. i will give updates later on when i get off.... hole in the block....
---- it was only 15psi...... |
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
sweet build love the paint
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
you drop a a valve?
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
dropped a rod. Sorry to hear that, looked promising.
|
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
aight.... finally got a chance to look at the car. the rod broke at the big end.... ummm. i guess the dirty B wasnt able to take the abuse.... lol. i will be dropping another LS to see how it does.. maybe i will leave it at 8psi.....
that sucks.... maybe the motor was just on its last leg...... its weird. the rod bearing still seems to be okay....just a snapped rod... |
Re: Jay's 90Integra build. HMT 916 NORCAL putting it down. 56k DIE!!!
must oh had a bent rod? from a jdm cold air intake sucking up some water but not enough to blow the motor and bent a rod?
|
All times are GMT -5. The time now is 05:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands