Introduction? I SUCK AT NSFW!!!!!
 

Name: Daniel
Niagara Falls Canada
'91 Tercel 2Dr

waabam!1!11!1!

ex:
http://photos-e.ak.fbcdn.net/photos-...09652_5964.jpg
ftw.
http://nikki-sexx.crocostars.com/model.jpg

Hey all HMT.com! Hope you can live with my little introduction on here.

Looking forward to being on this site, seems like a LOT of ingenuity floating around here.. No boosted projects as of yet but I've got some plans, right now I'm just raping fast cars on my stock 91 tercel with r-comp tires and sway bars.. I was looking at doin a JDM turbo swap, but now that I see the motor I have is pretty decent for boost I'm thinking I'll save my gold pieces and spend less for more!

Right now all I have under my belt is a basic understanding of cars (my dad is an *almost* master tech for toyota) and a big want for speed! I've read through Maximum Boost once already and learned a lot from that, hopefully I can apply it to myself soon.. Not sure what else to say..

I'm going to find myself a used nice working turbo and get a manifold fab'd for me and just over all do a nice clean job on this thing, cheap is the objective, not ghetto.. I'll probably use Emanage down the road if that is possible, start off with SAFC firstly.

here is a picture of my car, its got 325k miles on the body, engine, not so sure.. but I have a long block in my garage! :)

http://i31.photobucket.com/albums/c3...0124091534.jpg

First question:
I have read that ebay turbo kits are terrible (the type with turbos that have no casting other than the a/r on the compressor side) but how are the quality of the other parts like intercoolers?

Re: Is this where I make my introduction?
 

Who gives a ----? Do us all a favor and either post porn or drive that POS off a ------- clif.

Re: Is this where I make my introduction?
 

drop a 4e and be done.... thats what i did with my EL

Re: Is this where I make my introduction?
 

That is what I was originally thinking, bolt in swap, etc etc, but the only guy I trust to get me a clean motorset with warranty tells me its going to be $1,500 canadian, and I just don't have the cash for that right now.

Re: Is this where I make my introduction?
 

drop a 5e and boost that bitch.....

Re: Is this where I make my introduction?
 

Yeah that was another option I had in mind.. the 3E are just so cheap that its not so worrisome to blow them up.

Re: Is this where I make my introduction?
 

i used to have one....


used to be on TO back in the day... but gave it up....



Attachment 9361
Attachment 9362

Re: Is this where I make my introduction?
 

that's a clean looking car for sure..

but yeah everyone eventually has to move up in the world, i'm 17 so driving a boosted tercel will do for now, eventually i'll drive something "nicer"
Come summer I hope my ae86 will be my DD though.

Re: Is this where I make my introduction?
 

i drove my ---- from when i was 16 - 19.... boost that son of a bitch.....i would still be on TO but idont know my ------ password

Re: Is this where I make my introduction?
 

heh! yeah I've had it since last april, it's treated me good.. boost will be glorious, won't just be beating the expensive cars in the corners at the track days! ;D

Come end of march I'll be on the search for parts, I hate living pay check to pay check :-[

Re: Is this where I make my introduction?
 

ive been there since 02

Re: Is this where I make my introduction?
 

damn.

i was just reading another thread and saw someone saying that the ebay turbos aren't terrible quality.. this is interesting.. I might have to read up..
I just found a GT2860R turbo on kijiji for $220 though, no problems with it.. wish i had the cash right now, i'd pick it up.

Re: Is this where I make my introduction?
 

pm me your number!!!!


jay

Re: Is this where I make my introduction?
 

Buy a cdm turbo from phildtubbs, he has had zero problems with all the ones he has sold.
Attachment 9360

And he offers a 1 year warranty I think they are 210 shipped

Re: Is this where I make my introduction?
 

hi, thanks for the tip, i was just actually reading his recent thread with the D16Y turbo install.

I have seen youtube videos of the CDM turbos failing, so i steered clear.. it intrigued me to see that he supports them with a warranty!

I'll have to think about it.. might be my option.

Oh, and the intercoolers are fine too i suppose, not much can go wrong there?

Re: Is this where I make my introduction?
 

I like the Big light's in the front.

Re: Is this where I make my introduction?
 

Used ball bearing turbos are a form of failure. As are the e-unmanage and the afc hack.

You need a megasquirt and a t3. More than enough for a 17 yr old first turbo car, and t3 will make more power than that engine can handle in stock form. You may even want to find a t25. Ignition timing control is going to be the key to keeping that motor in one piece, MS is your friend.

Re: Is this where I make my introduction?
 

thanks man, I'm a huge rally fan, and I have a lot of friends with subarus, i have to show them up of course, and our winters here in canada are fierce.. eh ;D

thanks robb, i definitely have thought about T25 from a SR20, as they are pretty readily available. Thought Emanage might be the best way to go, but i'll look into MS.. just a little.. "intimidated" ? by the fact that its very hands on I guess?

What is so fail about a used BB turbo?

Re: Is this where I make my introduction?
 

callin this kid now to knock some sense into him.... and tell him what HMT is all about. also about his n00b post...................

Re: Is this where I make my introduction?
 

I had no luck with the t25 off the nissans, I killed maybe 4 or 6 of them. They hated high oil presure >:D; even on the nissan sites they said anything over 5psi would kill them :S. I had a really small restricter and still and still killed the oil seals.

Since I had a good day I will pass it on. CDM intercoolers , bov , and wastegates are ok; turbo's have been know to fail but phildtubbs is a good guy/ sponsor so it might be worth a shot, pm him and see if he has a hole kit for you. I wont trust any other ebay seller for cdm stuff, why because there all worth less. phildtubbs is the way to go it seems for you at least.

There is always the good old hmt way. Jk turbo/ intercooler/ bov/ injectors, and just run ms for oil lines pm TT. /Thread

Re: Is this where I make my introduction?
 

You can buy the MS already built if you dont feel like doing it yourself. Here. www.diyautotune.com

BB turbos cannot easily be rebuilt like a journal bearing turbo can. A used one with unknown oil supply all its life is a ticking time bomb. Used turbos in general are on par with used pistons IMHO, but at least you can cheaply rebuild a non-BB turbo, and usually you can buy 3-4 used Journal bearing turbos of the equivalent size for the price of the used gt28 (which aint that impressive to begin with...).

Re: Is this where I make my introduction?
 

heh!

I was planning to go junk yarding, there is a place in toronto that has a $50 day and you can take all the stuff you can carry out, so they have some turbo stuff there that I could get i/c and piping from!

robb: oh alright, thanks for the heads up!

Re: Is this where I make my introduction?
 

Re: NSFW Is this where I make my introduction? NSFW!
 

nice!
I was also told by astro that if I need i/c piping to go to weir tech for it. :D

Re: NSFW Is this where I make my introduction? NSFW!
 

naked pics of ex and also fix the red X's. or current GF

Re: NSFW Is this where I make my introduction? NSFW!
 

+1

Re: NSFW Is this where I make my introduction? NSFW!
 

haha naked pics would be CP for you guys.

and the red ex? it works for me.. its "nikki sexx" rofl. :P

Re: NSFW Is this where I make my introduction? NSFW!
 

This thread does not deliver. Cool rally 'cel, but no porn, and a build not worthy or porn



Aparently, I dont know the difference between a corolla and a tercel

Re: Introduction? I SUCK AT NSFW!!!!!
 

I fix the subject for you. :6

Re: Introduction? I SUCK AT NSFW!!!!!
 

your ex looks like she has a decent rack though.,.. gimme her number

Re: NSFW Is this where I make my introduction? NSFW!
 

Post the nudes of your ex and this will make for a great thread!
How much power you want 400-500bhp? it should be a snap!

Re: Introduction? I SUCK AT NSFW!!!!!
 

haha thanks for fixing the thread, i will admit to it.

unfortunately i dont have the whole "go on webcam nekked or i'll die" scheme down pat, so no nudies of her :(

she's columbian :8 ;) and a bitch ::)

Re: Introduction? I SUCK AT NSFW!!!!!
 

pm me her name and number

Re: Introduction? I SUCK AT NSFW!!!!!
 

You mean Colombain? Man you have to lay down the law when it comes to women; the more like ---- you treat them the better they treat you.

Re: Introduction? I SUCK AT NSFW!!!!!
 

bahaha, columbain? I don't get it.

but yes, if you show them who's boss, they do give you respect.

I was a helpless puppy dog back when i dated her haha.

Re: Introduction? I SUCK AT NSFW!!!!!
 

http://photos-e.ak.fbcdn.net/photos-.../34/530294834/

goober

Re: Introduction? I SUCK AT NSFW!!!!!
 

you could possibly buy the turbo kit i made on austins car...

i cant imagine you in this rice lette!!

You call this NSFW?

Drift, I'm in Hamilton and have a couple of turbo's I could sell you that are both good workable units.

-T3 60 trim (.48 exhaust) AiResearch that I used on my EL for a while
-KKK K03 from a 99 passat that I used on my buddies Fit turbo kit I made

you can PM me if your interested

Also, what are you planning to do for emissions? Just taking off the kit? Fakes e-tests are getting extremely hard to get nowadays in ontario. ------- MTO

I also wanted to add that if your going to Standard's pic days, you'll be lucky to find a turbo, let alone a decent one. The best I have ever picked from there is a rear disc teggy swap.