|
Re:internal wastegate and boost controller
EBCs are nice to have, simple and reliable. I'm looking into the new profec type s. I like the design of it, just like the profec A but better.
|
Re:internal wastegate and boost controller
if i do choose to use the internal gate at first, will i be limited to the maximum boost that the stock wastegate spring is set at no matter what the ebc is set to? like if the ebc is set to 10psi and the stock gate is at 8psi i will only get the 8psi right?
|
Re:internal wastegate and boost controller
No you will get whatever you set the EBC/MBC is set at. My staock waste gate acuator only gives me 5.5psi but I run 11psi with the EBC.
|
Re:internal wastegate and boost controller
excellet...just what i wanted to hear. thanks
|
Re:internal wastegate and boost controller
Originally Posted by djfob
EBCs are nice to have, simple and reliable. I'm looking into the new profec type s. I like the design of it, just like the profec A but better.
|
Re:internal wastegate and boost controller
Originally Posted by trebor_nordap
i agree, i'd buy one and not make my own. like a turbo xs mbc. i have one at 11psi stock int. w/g set at 6.5psi. no boost creep or boost spikes. you have to give the wategate it's own vacuume source like T it off the pcv valve.
|
Re: internal wastegate and boost controller
I have a Turbosmart MBC on a stock GT28r gate have some issues with the boost spiking about 2 lbs a little bit of boostcreep. EBC's are the only way to go as far as correcting you wastegates problem with fluctuating boost. I'm getting one this winter for sure.
|
| All times are GMT -5. The time now is 09:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands