Were can you get 90-93 Integra Intecooler Piping from for a good price?

 

www.jegs.com, go to exhaust piping, or jcwhitney, i think --------------------------- sells some piping kits to.

 

A little shameless whoring...

We offer kits for the Civics, and imagine the Integra setup will be similar. Here is a pic of what we offer in the Civic kit...



and a link to the kits in our store...

http://tunertoys.zoovy.com/category/charge_piping_kits/

Don't forget to use the coupon code listed in our FS post to save yourself an additional 5%.

Craig

 

I got the IC pipe kit from craig, very good kit, I have a ton of pipe left over too. Just make sure you have a sawsall (with some good metal blades) and just mig weld it.

 

Hey Paul,

Was there anything you didn't like about the kit, anything we needed to improve upon?

Craig

 

the only thing i didnt liek, well not a ned thing but kind of an annoyance was the grease in the piping. when we were cutting the pipes, all the burrs would get cought in there and stuck on the grease, and we had to keep cleaning them out. but other than that, the kit was great. nice thick piping, great bends, and way more piping than we needed.

 

I was always wondering what material this stuff is, is it stainless or just regular steel, I imagine it should be stainless since you dont want it to start rusting on the inside or outside, someone please inform me, because if it is regular steel/metal I can get ---- stuff real cheap for myself.

 

Our kits are mild steel. We will be offering aluminized kits soon, but probably will never offer stainless steel.

Craig

 

What do you recommend using to clean off the grease on the outside before spraying them with some paint?