honura

Ok I was trying to install the T and they gave me the wrong one. Now I stripped the tread anything I can do to fix this? I know 3/4 on the tread is ok but it after the stripped part. Any help would be great.

MikeJ-2009

pics? details on what fittings you're using?

honura

I hope this helps

MikeJ-2009

Your pictures remind me of my 21st birthday. :P

So you stripped the threads on the fitting for the feed line to attach to, correct?



You could get a new fitting and try again, you could try to re-thread that fitting, or you could re-thread it one size up to accept a larger thread. (You'd have to get a larger thread on the feedline as well in that case.)

Ravage70

shoulda bought a tuner toys fitting

honura

I think you got me messed up. The block is stripped. not the fitting the fitting is fine. I bought another fitting which was the first one I used and that fucked everything up. So I thought by getting the right one it would go in fine. Now I got the new fitting and it will not go into the hole. errr Im pissed.

MikeJ-2009

Ok, than what you should do is re-thread the block to accept the next size up thread, and then get (that thread size) to 1/8 npt (bspt would be better) and adapt the whole thing.

honura

See that's where I get lost. I need to be feed 100% what it is I need. I don't understand bspt and all that .

Ravage70

u need to buy a tap and die set
ull understand then

honura

Go to the shop get a tap and die set. Hummm ok. Now what size and what the hell it die set?