Installing Injectors w/out management???
Can you install the DSM 450cc injectors on a Y8 without management? I'm putting a turbo on using a V-AFC-II, but I wanted to get the injectors in. Will it hurt without the turbo and tuning?
|
Re:Installing Injectors w/out management???
if u dont have nething to control the injectors the car wont start
|
Re:Installing Injectors w/out management???
Originally Posted by turborolla94
if u dont have nething to control the injectors the car wont start
|
Re:Installing Injectors w/out management???
resistors will lower the voltage/current to the injector so it works with your current ECU, it only makes it comptable to the ecu.
if there are no FM, with those injectors, it will spray A LOT of fuel into the cylinder since the ecu is still operation the injectors at the same speed.. soak the plugs and it won`t start. of even if you got it started, it shouldn`t idle at all. |
Re:Installing Injectors w/out management???
yeah u can use the 450's with a VAFC.
u set your fuel values like -40% -30% etc.. its called "the hack" also resistors have to be soldered in, or a resistor box put in/ |
Re:Installing Injectors w/out management???
i have a 89 honda so i already have a resistor box, there is no wiring for me correct?
|
Re:Installing Injectors w/out management???
Correct. I think what Donald was trying to say is that the resistors lower the impedance (ohm reading) not the voltage; to prevent your injectors from burning out your ecu. But even with the resistors the ecu is still going to think you have 240 cc injectors, and will pulse the 450cc injectors at the same speed, thereby flowing almost twice as much fuel. You'll foul your plugs, and even if the car runs, your cat will go bye bye and you will get 5 mpg.
|
Re:Installing Injectors w/out management???
Originally Posted by Will
Correct. I think what Donald was trying to say is that the resistors lower the impedance (ohm reading) not the voltage; to prevent your injectors from burning out your ecu. But even with the resistors the ecu is still going to think you have 240 cc injectors, and will pulse the 450cc injectors at the same speed, thereby flowing almost twice as much fuel. You'll foul your plugs, and even if the car runs, your cat will go bye bye and you will get 5 mpg.
|
Re:Installing Injectors w/out management???
Your car will start and be able to move, but sure will make alot of smoke.
|
Re:Installing Injectors w/out management???
Originally Posted by Will
Correct. I think what Donald was trying to say is that the resistors lower the impedance (ohm reading) not the voltage; to prevent your injectors from burning out your ecu.
|
All times are GMT -5. The time now is 06:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands