Installing Charge pipes in my 91 crx si... HELP!!!
 

well i got 8 Ubends four from turbopiping and four from jcwhitney, 2.25 inch diamters... i dont wanna relocate my battery... how can i make the pipe for the passenger side?

also, could i seal the breather on the cold air intake i have and weld on the flange for the bov on there? and use that instead?


Please post pics if you have any... thnx

Re:Installing Charge pipes in my 91 crx si... HELP!!!
 

just face the facts and move your damm battery, i did and everyone else with that setup has. For the cables, box, and a new battery from autozone it ran me like 50-60 bucks and took me 30 minutes to install. plus once it's gone it gives you plenty of room to mount and MSD box and coil.

Re:Installing Charge pipes in my 91 crx si... HELP!!!
 

With 8 u bends you should be able to work around anything. I guess I am not too familiar with the rex engine bay. I would want to keep the battery up front for traction purposes.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Installing Charge pipes in my 91 crx si... HELP!!!
 

Take the route the stock air intake makes...It will required sum cutting

Re:Installing Charge pipes in my 91 crx si... HELP!!!
 

ttt

Re:Installing Charge pipes in my 91 crx si... HELP!!!
 

Just found this one thread down.
http://www.imagestation.com/picture/...f/fbebb11e.jpg
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Installing Charge pipes in my 91 crx si... HELP!!!
 

wow , is that about 9 clamps that i see in that lil section of piping?

Re:Installing Charge pipes in my 91 crx si... HELP!!!
 

umm ok dr boost.. i have mandrel bends..
thats such a nigg rigged ass setup in that pic..
thats horrible.. i would never do that to my car..
that makes baby jesus cry..

Re:Installing Charge pipes in my 91 crx si... HELP!!!
 

ha! is that a screwdriver hanging off of the dizzy :D