impossible project Need Help
I am a college student takin Mechanical Engineering 101 For our final we have been give a group project Create a type of boost for a 420A engine Butnot aftermarket parts. A cheap Homemade turbo boost system. Right now my idea is to hook a fuel injector to a soleniod Need help Anybody got an idea or have done it before Help please
|
Re: impossible project Need Help
You could route two exhaust ports back to the intake. Its boost, just not the kind you want.
|
Re: impossible project Need Help
What about some sort of gas that expands once it sees the heat from the engine?
What about the old school days of using a smog pump to boost pressures slightly? Or, you could do something like the new Mercedes (I think), that has a pump hooked up to the crank that uses steam to increase rotational force. Not quite boost but it does add power. |
Re: impossible project Need Help
I forget who did it, but some guys boosted several cars with a gas leaf blower. It worked too
|
Re: impossible project Need Help
No aftermarket? The head off to the junkyard in search of an itty bitty ass turbo :)
|
Re: impossible project Need Help
wtf!?
You really gotta be more specific than this. And how much do you care about the engine. Do you have to prove it's effectiveness or can you just sticker tune? What's the story? |
Re: impossible project Need Help
Make an electric pump that injects pressurized air into the engine. Basically an air compressor hooked up to feed the engine. The electricity can be supplied by the rotating axle of the wheel, or better yet, the crank.
|
Re: impossible project Need Help
The idea of the project is recreate the same effects of a turbo but nota the same design. A turbo pressurize the intake air by using the exhaust is isn't it possible to use some time of electric air pump. If so how to create low and high boost how the hell would u go about connecting it to weak ass 420 A engine
|
Re: impossible project Need Help
if you conneted an air pump to it, couldnt you put a resistor with a switch to the power to lower the voltage so it runs slower?
|
Re: impossible project Need Help
Originally Posted by play
The idea of the project is recreate the same effects of a turbo but nota the same design. A turbo pressurize the intake air by using the exhaust is isn't it possible to use some time of electric air pump. If so how to create low and high boost how the hell would u go about connecting it to weak ass 420 A engine
|
All times are GMT -5. The time now is 02:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands