SleepingCRX88

What u guys think is this turbo worth puttin on my engine im build or should i just save for a bigger one.

D16y8
YCP Turbo Pistons and Rings
Egale Rods
7LD Flywheel
VAFC

and more to come

bumblezc

IHI Will be way to small for a built motor!!!

go to a t3 or t3/t4

boostaddict

IHIRHb5 is to small to do anything over 4500rpm if you ask me.... go t3... like off a saab or something

crx2fast

IHI = to small

djfob

On a built D I wouldn't run anything smaller than a 48/60 T3.

delsol95

Isnt the ihi off a t-bird almost the same as a t3, if he has that one it might be ok, but still probley to small

boostaddict

ihirhb5 is off a probe, its tiny

Speedracer32

and 1st gen mx6 i believe

topspeed

Who here acutally has experience with this turbo? cause i'm about to run this on a stock internal D15B7? i would also like to hear from someone who has experience with this turbo not because you heard from a friend of a friend of yours its a small turbo or it "looks" too small.

boostaddict

I have 2 probes, ones got the T-bird ihi and ones got the normal IHI


the normal ihi which is what you are asking about spools really early, like im talking fully spooled at 2500rpm with proper exhaust, pulls hard till about 4400-4600 rpm then dies off... but they are cheap, and they are quick spooling... so I mean... its fine... I blew mine running 18lbs of boost through it for 3 months... hope thats of some help to you