IC piping question

Reply Subscribe

Thread Tools

Search this Thread

Jun 7, 2009 | 10:47 AM

DK_Fr0m_cc

Thread Starter

0.0 BAR

Joined: May 2009

Posts: 25

IC piping question

i have a d16 and i only plan on running like 6 pounds on it
do you think would be safe to use pvc and the rubber plumping couplingsfor IC piping every answer will be appreciated thanks

Jun 7, 2009 | 12:00 PM

Andy

0.0 BAR

Joined: Jun 2009

Posts: 3

Don't do it. When PVC gets hot, it might release harmful chemicals into your fresh air stream. Alum or SS with some cheap silicone couplers would be a much better idea IMO.

Jun 7, 2009 | 02:57 PM

marty095

0.5 BAR

Joined: Jun 2009

Posts: 53

i've done it w no major issue...i wouldn't consider it permanent tho

Jun 7, 2009 | 02:58 PM

marty095

0.5 BAR

Joined: Jun 2009

Posts: 53

makes it alot easier when you go to actually buy the metal too, you've a known good model for it

Jun 7, 2009 | 03:04 PM

DK_Fr0m_cc

Thread Starter

0.0 BAR

Joined: May 2009

Posts: 25

thanks man yea i wouldnt make it permanent but i am kinda worried about the heat comming straight out of the turbo outlet

Jun 7, 2009 | 04:13 PM

gti_integra

0.5 BAR

Joined: May 2007

Posts: 53

i seen it done and i have it on my car till i get my pipe welded up

Jun 7, 2009 | 05:09 PM

2BarRacing

1.0 BAR

Joined: Jun 2009

Posts: 300

From: Chicago Il

ran it for 2 months off the cold side of the IC just try to grind a groove in it so the clamps grab even a little

Jun 7, 2009 | 11:52 PM

DK_Fr0m_cc

Thread Starter

0.0 BAR

Joined: May 2009

Posts: 25

what couplings did you guys use the rubber plumbing ones

Jun 8, 2009 | 12:47 AM

2BarRacing

1.0 BAR

Joined: Jun 2009

Posts: 300

From: Chicago Il

Quote:

Originally Posted by DK_Fr0m_cc

what couplings did you guys use the rubber plumbing ones

i used those but ditch the bitchass clamps for some heavy duty ones. Just make sure they dont rub any sort of metal as they will tear like 17yr old cheerleaders -------